Veris

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 12” (305mm), 10K T3, Thermistor, Resistive Output

T Series temperature sensor, duct with mounting Box, 8” probe, 10K type 3 thermistor, resistive output

Current Switch, Split-Core, Micro, 0.15-60A, Normally Open Output

Current Switch: Adjustable Trip Point, 0.5-175 Amp Range, Normally Open 1.0A@30VAC/DC, 0.5A or less Minimum Trip Point, Split-Core Housing, Status LED

Current Switch w/Relay: Adjustable Trip Point, 1-135 Amp, 0.1A@30VAC/DC, 1A or less Minimum Trip Point, SPST, N.O. Relay, Solid-Core Housing, LED

Current Switch: Adjustable Trip Point, 0.75-50 Amp, N.O. 1.0A@30VAC/DC Status Output, 0.75A or less Minimum Trip Point, Solid-Core Housing, Status LED

Current Switch: Adjustable Trip Point, 0.75 - 50 Amp Range, Normally Open 1.0A@30VAC/DC, 0.75A or less Minimum Trip Point, Split-Core Housing

Current Switch w/Relay: Adjustable Trip Point, 1-135 Amp, 1.0A@30VAC/DC, 1A or less Min Trip Point, SPDT, 24VAC/DC, Solid-Core, Relay Power LED

Flush Mounted Temperature Sensor: 1k Ohm Platinum RTD Thermistor, Legacy

Current Switch w/Relay: Adjustable Trip Point, 1-135 Amp, N.O. 1.0A@30VAC/DC, 1A or less, SPST, 12 VDC nom., Solid-Core, Status LED, Relay Power LED

Current Switch: Adjustable Trip Point, 1-35 Amp, N.O. 1.0A@30 VAC/DC, 1.0A or less Minimum Trip Point, Solid Core Housing, Status LED, UL, CE

Temp, Duct w/Mtg Box, 4 in , 10k w/11kS, RTD

AA1 Series bypass valve assembly

Current Switch: Fixed Trip Point, 1.5-200 Amp, Normally Open 1.0A@30VAC/DC Status Output, 1.5A or less Fixed Trip Point, Split-Core Housing, UL, CE

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Current Switch: Adjustable Trip Point, 1-135 Amp Range, Normally Open 0.2A@120VAC/DC, 1.0A or less Minimum Trip Point, Solid-Core Housing, Status LED

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

PRESSURE GAUGE 50 PSIG 0-10 VDC

Current Switch w/Relay: Fixed Trip Point, 1.5-200 Amp, N.O. 1.0A@30VAC/DC, 1.5A or less Fixed Trip Point, SPDT Relay, 24VAC/DC Relay Coil, Split-Core

Roof Top Unit, Heat Pump \& Indoor Air Quality Ctrl: BACnet MS/TP, RH sensor \& control, PIR motion sensor, White Case/Fascia

Current Sensor: 0-5VDC Analog Output, 0-10 Amperage Range, Split-Core Housing, UL Listed, RoHS Compliant

Current Switch w/Relay: Adjustable Trip Point, 1-135 Amp, 1.0A@30VAC/DC, 1A or less Minimum Trip Point, SPST, N.O. Relay, Solid-Core Housing, LED

Split Core Adjustable Set-Point Digital Output VFD Current Switch, 3.5-135A, 20-75Hz Amp Range, Normally Open With Status LED 0.1A@30VAC/DC

Current Sensor: 4-20mA Loop Powered Output, Split-Core, 100-300 Amps, UL Listed for use on 75 deg. C insulated conductors, CE, RoHS Compliant

Current Switch: Adjustable Trip Point, 1.25-50 Amp Range, Normally Open 0.2A@120VAC/DC, 1.25A or less Minimum Trip Point, Split-Core Housing, LED

GWN Series carbon monoxide sensors

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Transformer: 99 VA, 120 VAC, 24 VAC, Circuit Breaker, Class II and III, 2HUB + FT, Prim / Sec Wires, UL, CE

Transformer: 50 VA, 120 VAC, 24 VAC, Circuit Breaker, Class II and III, 1HUB + FT, UL, CE

TEMP DUCT W/MTGBX 8IN 1K BALCO

T Series temperature sensor, averaging duct, 24’ probe, BALCO RTD

GWN Series wall mounted gas platform, 1-Gang, IND, 0-5/10

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

CONTROL LOW VOLTAGE FCU RH PIR BACNET WHITE CASE

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Current Sensor: 4-20mA Analog Output, 0-30/60/120A field selectable Amp Range, Split-Core Housing, UL Listed for use on 75 deg. C insulated conductors

Current Switch: Adjustable Trip Point, 2.5-135 Amp Range, Normally Open 1.0A@30VAC/DC Status Output, 2.5A or less, Split-Core Housing, Status LED

Veris TW2 Series Temperature Sensor, Wall, 10K Type 3 Thermistor

Transformer: 375 VA, 120 VAC, 24 VAC, None, General, Foot, Prim / Sec Wires, UL, CE

Current Switch w/Relay: Adjustable Trip Point, 2.5-135 Amp, 1.0A@30VAC/DC, 2.5A or less Minimum Trip Point, SPST, N.O. Relay, 24VAC/DC, Split-Core

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Veris CW2 Series Air Quality Sensor, Wall, CO2, Segmented LCD, Temperature Transmitter

Current Switch w/Relay: Fixed Trip Point, 1.5-200 Amp, N.O. 1.0A@30VAC/DC, 1.5A or less Fixed Trip Point, SPST, N.O. Relay, 24VAC/DC Relay Coil

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Current Sensor: 4-20mA Analog Output, 0-10/20/40 Amperage Range, Solid-Core Housing, UL Listed, CE

Current Sensor: 4-20mA Loop Powered Output, Split-Core, 300 to 800 Amps, UL Listed for use on 75 deg. C insulated conductors, CE, RoHS Compliant

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Temp Sensor: Ave, Duct Mount, Probe Length: 6’ (1.8m), 10K Dale, Thermistor

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 12” (305mm), 1K Platinum, RTD, Resistive Output

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 12” (305mm), 10K T2, Thermistor, Resistive Output

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 12” (305mm), 10K Dale, Thermistor, Resistive Output

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 12” (305mm), 1.8K Thermistor, Resistive Output

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 8” (203mm), 10K T2, Thermistor, Resistive Output

Duct Temperature Sensor with Mounting Box: Probe Length: 6 in. (152mm), 10k Ohm Type 3 Thermistor, Resistive Output, Continuum

Duct Temperature Sensor with Mounting Box: Probe Length: 6 in. (152mm), 10k Ohm Type 2 Thermistor, Resistive Output, I/NET