Damper Actuators

ACTUATOR DIRECT COUPLED

Damper Actuator 20 lb-in,NSR,Floating

Auxiliary switch 2 x SPDT add-on

Spring Return Rotary, 20 lb-in, 24Vac/dc, 2-pos Control, 30sec Run, Plenum

Non-spring Return, 44 lb-in (5Nm), 24 Vac, 0-10 Vdc Control, 90sec Run, Plenum

Non-spring Return, 44 lb-in (5Nm), 24 Vac, Floating Control, 90sec Run, Plenum

PNEUMATIC ACTUATOR

Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 24 V, On/Off, Floating point, terminals

Diaphragm MK-3000 Series

ANK ARM

Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, terminals

(N05010) DIRECT COUPLED ACTUATOR

Non-spring Return, 44 lb-in (5 Nm), 24 Vac, Floating Control, 90 sec Run

Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 24 V, On/Off

Damper Actuator, Pneu No 4, 4” Stroke, 8-13psi, Integ Pivot Mount, UL Rec F/S

Mounting kit, for foot mount installation

SmartX, Damper Actuator, proportional 0-10 Vdc, non-spring return, 24 Vac, 3 ft plenum cable, 44 lb-in, NEMA 2

Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 24 V, On/Off, Floating point

Rotary to Linear Kit can be used with OpenAir™ GDE and GLB Damper actuators.

Damper Actuator, 90 in-lb [10 Nm], Non fail-safe, AC/DC 24 V, On/Off, Floating point

ROTARY ACTUATOR; 18 IN-LB; NSR; 30 SEC; 90 DEG; 24 VAC

Damper Actuator 88 lb-in,NSR,2PT/3PT,plenum

Damper Actuator, Pneu No 3, 2-⅜” Stroke, 8-13psi, Integral Pivot, Pivot Post

Actuator: Metal, 1-11/16”, 5-10 PSI, Delrin Bushing, Clevis Only

Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 100...240 V, On/Off, Floating point

DAMPER ACTUATOR DIAPHRAM; 2 PACK PRICED PER EACH

No.3 PNE ACT.5-10PSI 2 ¾”STRK

Replacement Diaphragm, No. 4 Damper Act w/ Discontinued Cast Alum Hsg 5pk

1” JACKSHAFT COUPLER; FOR MOUNTING ON A 1” DIAMETER DAMPER SHAFT

Damper Actuator, Pneu No 4, 4” Stroke, 3-7psi, Integral Pivot Mount, UL Rec F/S

24V Two Position Spring Closed for EARD

Replacement Diaphragm, No. 4 Damper Act, Sheet Metal Cylinder Housing, 5 pkg

DAMPER ACTUATOR 4 NM NSR; 4 NM DPR ACT FLOATING W/TIMEOUT 24 VAC 50/60 HZ PLENUM CABLE

MNT KIT M92X0 HORIZONTAL; REMOTE MOUNT KIT M92X0 HORIZONTAL WITH CRANKARM AND BALL JOINT

Non-spring Return, 44 lb-in, 24Vac, 0-10Vdc Control, 90s Run, 6ft Plenum Cable

BALL JOINT DMPR 1\=BG OF 5; BALL JOINT DAMPER CONTROL

Weathershield Kit, OpenAir GCA, GBB, GIB Series Damper Actuators

M9208 REMOTE MOUNT KIT; M9208 REMOTE MOUNT KIT W/CRANKARM

Spring Return Rotary, 20 lb-in (2 Nm), 120 Vac, 2-position Control, 30 sec

No. 3 Pneumatic Actuator, 8-13 psi, Extended Shaft Mounting, 2-¾-inch Stroke

Standard Shaft Adapter to 1”dia shaft w/ OpenAir GCA, GBB, GIB, GGD Actuators.

(N0524) DIRECT COUPLED ACTUATOR

MNT KIT M92X0 VERTICAL; REMOTE MOUNT KIT M92X0 VERTICAL WITH CRANKARM AND BALL JOINT

DAMPER ACTUATOR 4 NM NSR; 4 NM DPR ACT FLOATING W/TIMEOUT 24 VAC 50/60 HZ TERMINAL SCREWS

Non-spring Return, 44 lb-in, 24Vac, 0-10 Vdc Control, 90sec Run, Terminal Strip

Eaton 10250T pushbutton

PUSH ROD

ADJUSTABLE STOP KIT; USED WITH M9210 \& M9220

SmartX, Damper Actuator, floating, non-spring return, 24 Vac, 3 ft plenum cable, 44 lb-in, NEMA 2

NO.3PNEU ACT 8-13,2 ¾”,RUSKIN

Auxiliary switch 1 x SPDT add-on

Configurable Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 24 V, 2...10 V, terminals

Crank Arm Kit, w/Bracket for OpenAir GCA, GBB, GIB, GKB Damper Actuators.

Mounting kit for linkage operation for flat and side installation

ROTARY ACTUATOR; 35 IN-LB; NSR; 60 SEC; 90 DEG; 24 VAC

Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 24 V, On/Off, Floating point, terminals

BALL JOINT CONNECTOR

TFB(X) crankarm with ¼” slot.

Damper Actuator, Pneu, Number 3, 2-⅜” Stroke, 5-10psi, Integral Pivot Mount

Damper Actuator, 45 in-lb [5 Nm], Non fail-safe, AC/DC 24 V, On/Off, Floating point