Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI QTS-61110X-S000000

SKU: CS6287673MPN: QTS-61110X-S000000Alternate Part #: 136150

Toxic Gas Sensor, Hydrogen Sulphide, Industrial 316 S.S., (NEMA 4X, 7, 9)

ACI QTS-17101X-S000000, QTS-17111X-S000000, QTS-17131X-S000000, QTS-17131X-SP00000, QTS-17171X-S0F0000, QTS-17171X-SPF0000, QTS-17181X-S000000, QTS-17191X-S000000-ACETONE, QTS-17191X-S000000-DIESEL, QTS-17191X-S000000-ETHANOL, QTS-17191X-S000000-ETHYLENE, QTS-17191X-S000000-HYDRAZINE, QTS-17191X-S000000-JET FUEL, QTS-17191X-S00D000-ALCOHOL, QTS-61110X-S000000
Contact us for pricing and availability

Product Details

Toxic Gas Sensor, Hydrogen Sulphide, Industrial 316 S.S., (NEMA 4X, 7, 9)

Product Configuration

Gas Type Hydrogen Sulphide

Product Family Specifications

Accuracy +/- 2.5% of Reading
Sensor Life 2 to 3 years, typical
Sensor Type Electrochemical, non-consuming
Repeatability +/- 1% of Reading
Response Time T90: \< 60 Seconds, typical
Output Signals 4-20 mA (2-Wire, Loop Powered)
Product Weight Industrial “E”/“S” Enclosures: 5.00 lbs (2.27kg) Commercial “C”/“D”/“N” Enclosures: 2.00 lbs (0.91kg)
Unit Shelf Life 6 Months from date of purchase (Must be installed and operational)
Agency Approvals RoHS, CSA-4828-02 (CSA File #: 088890 0 000 for Industrial Enclosure Options Only)
Factory Set Range See Gas Sensor Selection \& Specification Table on back of data sheet
Product Dimensions Commercial “C” Enclosure: 6.60” (167.64 mm) x 4.23” (107.44 mm) x 2.60” (66.04 mm) Commercial “D”\& “N” Enclosure: 6.60” (167.64 mm) x 4.23” (107.44 mm) x 3.70” (93.98 mm) Industrial “E”\& “S” Enclosure: 10.70” (271.78 mm) x 5.71” (145.04 mm) x 4.25” (107.95 mm)
RFI/EMI Protection 4.0 Watts @ 1m (3.28 ft) Radiated
Operating Environment Indoor Use only
Connections | Wire Size Screw Terminal Blocks, 16 to 24 AWG (0.51 to 1.30 mm) Shielded Twisted Pair
Maximum Load (@ 24 VDC) 600 Ohms
Recommended Maintenance Accuracy \& Bump test every 3 to 6 months or as required by Code | Replace sensor as need
Operating Humidity Range 0 to 90% RH, non-condensing (Continuous); 0 to 95% RH, non-condensing (Intermittent)
Operating Temperature Range See Gas Sensor Selection \& Specification Table on back of data sheet
Supply Voltage / Protection +24 VDC nominal (+12 to 36 VDC Load Dependent) | 0.5A Socketed Pico Fuse
Terminal Block Torque Rating 0.37 ft-lb (0.502 Nm) Nominal
Operating Atmospheric Pressure 14.696 psi (1.0132 bar) +/- 10% Note: When installed @ > 3000’ above sea level, the gas transmitters must be veried for accuracy \& re-calibrated as needed after installation
Storage Temperature | RH Range 32 to 68ºF (0 to 20ºC) | 15 to 90% RH, Non-Condensing
Coverage Area / Mounting Height See Gas Sensor Selection \& Specification Table on back of data sheet
Supply Current / Power Consumption 25 mA maximum | 0.9 Watts maximum
Intrinsic Safety Barrier Requirement 28.5 VDC maximum and 300 minimum load Note: Requirements to meet when installed with CSA Approved Intrinsic Safety Barriers in Class A, B, C \& D Certified environments
Enclosure Specifications (Type, Material Type, Flammability, NEMA/IP Rating, Explosion Proof) Commercial “C”: General Purpose (Wall Mount); ABS Plastic, UL94 V-0; NEMA 1 (IP10) Commercial “D”: General Purpose (Duct Mount); ABS Plastic, UL94 V-0; NEMA 1 (IP10) Commercial “N”: Weatherproof (Wall Mount); ABS Plastic; UL94 V-0; NEMA 4X (IP56) Industrial “E”: Industrial Connection Head; Aluminum (Epoxy Coated); NEMA 4X (IP56) and Enclosure meets Type 7 \& 9 Explosion Proof Class 1 Div. 1, Groups B, C, D also Group A; CSA, FM (Factory Mutual), EX (Explosion Proof), UL listed Industrial “S”: Industrial Connection Head; 316 Stainless Steel; NEMA 4X (IP56) and Enclosure meets Type 7 \& 9 Explosion Proof Class 1 Div. 1, Groups B, C, D also Group A; CSA, FM (Factory Mutual), EX (Explosion Proof), UL listed Note for E \& S enclosure: The Cl2, ClO2, HCl, SO2, NO2, NH3, and O3 sensor assemblies are NOT explosion-proof rated

Specifications

SKUCS6287673
MPNQTS-61110X-S000000
Alternate Part #136150

You may also like