Sensor Accessories

Snap-in “labor-saving” fitting for mounting 2 x 2 in. thermostats, humidistats, and transmitters on drywall having at least 3-½ in. studs.

Wire Guard With Steel Base Plate, 4-¼”H x 1-⅝”W x 1-⅝”D

Gray cover with Barber-Colman logo dial

Pilot Restrictor Kit (All Relay Type Except -600)

Gasket for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Adaptor Kit

Factory Authorized Parts™ - HH79HZ004 - THERMISTOR ASSEMBLY

Replacement Humidity Element for Veris Sensors, 2% Accuracy

Thermostat conversion kit, white.

RH SENSOR 5% REPLACE ELEMENT

Replacement Humidity Element, 1% Accuracy, NIST

RH SENSOR 2% REPLACE ELEMENT

LINKAGE KIT

Electrical Contact Assembly for TAC Pneumodular Control System

Setpoint Knob Kit Fahrenheit,TK-1001 thru TK-1601

Air Velocity Averaging Pitot Tube 6 in

Air Velocity Averaging Pitot Tube 8 in

Air Velocity Averaging Pitot Tube 10 in

Packing Wrench For VB-121, VB-131, VB-151, VB-314, VB-324, VB-334, VB-354 Valves

Gauge tap adaptor for T15 or T16 only. One end accepts ⅛ in. MPT gauge, other end screws into thermostat body.

Base For Field Mounting Pneumodular Receiver-Controller, Plus Two 2” Receiver Gauges and Two 1-½” Pressure Gauges, Direct Acting

Tubing Connectors Quantity Package (50) for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Socket Assembly (includes one 22-130) for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Adaptor, brass, for mounting T150 Immersion Transmitter in Barber-Colman AT-201 or AT-203 well.

Mounting Plate For Mounting Any Two Single Function Room Controllers, 6-14”H x 6-¼”W x ¼”D

Resistor Kit, Converts and Interfaces a 4 to 20 mAdc External Signal to 1 to 11 Vdc Signal, 250 Ohm, +/-0.1% Tolerance, ½ Watt, T (6 Pack)

Mounting Base, Auxiliary, Single, 5-7/16”H x 3-⅞”W x ⅜”D

Plug Strip for TAC Pneumodular Control System

Voltage Divider

3/16 in. tygothane tubing assembly, with spring, two eyelets, and two barbed fittings for ¼ in. plastic tubing.

Aspirator Kit

Gray cover with Barber-Colman logo dial

Surface Mounting Base, Single, 4-⅝”H x 3-⅛”W x 1”D

Restrictor Kit (All Bleed Bulb Type) TK-2xxx, TK-3xxx, TK-4xxx

Input Restrictor Kit: RKS-1001 thru RKS-4002 (1 Req. Per Input)

Sub-Base, Duplex Thermostat Selector Switch, DP4T, For Use With All Duplex or Two-Stage Electric Room Thermostats

Arc Suppressor (For Floating Type Control)

TSP MOUNTING BRACKET

6-527 (Schneider Electric)

Switchover Kit: TK-1201, 1301, 1601

Mounting Hardware, TK-1xxx, -5xxx, Except TK-17xx, -18xx

Gray cover with Barber-Colman logo dial

Gray cover with Barber-Colman logo dial

RES SHUNT 500 OHM

PNR-2042 (Schneider Electric)

Mounting Kit, Stick Pad \& Tie Wrap

SCW FILHD 6-32 .25 TAPTITE SLT

UTILITY BOX

Gray cover with Barber-Colman logo dial

Relay Repair Kit: TK-1001 Thru TK-1601, TK-6xx4, TK-8xx4

2 IN BRASS WELL

Casing 2-Module Spare

Casing 5-Module Spare