Sensor Accessories

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

AA Series duct static pickup probe, 8”, dry pressure

1/16 in. and ¼ in. hex head thermostat calibration and coverscrew wrench. (Also adjusts 2341 Series Receiver-Controllers.)

1.0 scfh In-Line Restrictor.

Restrictor for copper fitting

AA Series room static pressure pickup

AA Series duct static pickup probe, 4”, dry pressure

Squeeze Bulb Pump With Valve For Testing pneumatic Controls And Actuators.

Pneumatic Capacitor

1.0 scfh Restrictor Tee for Use with One-Pipe Thermostats or Transmitters (¼ in. polythylene or polyurethane tubing). Color: red.

Check valve tee. Mounts on upper end of 22-120 socket, permits connection to field-mounted devices.

0.5 scfh Restrictor Tee. Color: Light Green.

Gray cover with Barber-Colman logo dial

Mounting Bracket/Hardware

Duct Mounting. Kit For Pneumatic and ElectricTemperature Bulbs

Contact Burnishing Tool

STP Series pocket STP, 150 mm/5.91 in., stainless steel

STP Series pocket STP, 200 mm/7.87 in, stainless steel

Backplate

Gauge Overlay Kit 3-½ INCH

THERMOMETER ASY FAR

Resistor Kit, 11K Ohm, +/-0.1% tolerance, ⅛ watt (12 Pack)

Restrictor .005” (Red)

RESTRICTOR

IMMER TEMP SENSOR

STP Series Pocket STP, 50 mm/1.97 in., Stainless Steel

STP Series pocket STP, 100 mm/3.94 in., stainless steel

Pocket STP 400 mm (15.75 in) Brass

Blind Module 1-Module Spare