Sensor Accessories

Snap-in “labor-saving” fitting for mounting 2 x 2 in. thermostats, humidistats, and transmitters on drywall having at least 3-½ in. studs.

Receiver-Controller, Reverse-Acting

Receiver Controller, Universal Replacement Single or Dual Input With Remote Set Point Adjustment, Cover Included

AA1 Series bypass valve assembly

Wire Guard With Steel Base Plate, 4-¼”H x 1-⅝”W x 1-⅝”D

Receiver-Controller, Reverse-Acting, pre-mounted on base for field use

Gray cover with Barber-Colman logo dial

Pilot Restrictor Kit (All Relay Type Except -600)

Sub-Base, Single Thermostat Selector Switch, One DP4T, One DPDT, For Use With All Single Electric Room Thermostats Except TC-114 and TA-121

Gasket for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Wire Guard With Steel Base Plate, 6-½”H x 6-⅝”W x 3-¼”D

Adaptor Kit

Factory Authorized Parts™ - HH79HZ004 - THERMISTOR ASSEMBLY

Replacement Humidity Element for Veris Sensors, 2% Accuracy

Base For Field Mounting Pneumodular Receiver-Controller, Plus Two 2” Receiver Gauges and Two 1-½” Pressure Gauges, Direct Acting

Paralleling Relay: Solid Start, Actuator or Panel Mount

Sensing Cable, 25 ft

Thermostat conversion kit, white.

RH SENSOR 5% REPLACE ELEMENT

CALIBRATION KIT for Veris CO2 Sensors

Replacement Humidity Element, 1% Accuracy, NIST

RH SENSOR 2% REPLACE ELEMENT

AGxE Series Rugged Metal Wall Mount Enclosure

TAC Pneumodular tubing - 100 Ft. Roll

LINKAGE KIT

Electrical Contact Assembly for TAC Pneumodular Control System

Setpoint Knob Kit Fahrenheit,TK-1001 thru TK-1601

Air Velocity Averaging Pitot Tube 6 in

Air Velocity Averaging Pitot Tube 12 in

Air Velocity Averaging Pitot Tube 8 in

Air Velocity Averaging Pitot Tube 10 in

Air Velocity Averaging Pitot Tube 14 in

Packing Wrench For VB-121, VB-131, VB-151, VB-314, VB-324, VB-334, VB-354 Valves

Gauge tap adaptor for T15 or T16 only. One end accepts ⅛ in. MPT gauge, other end screws into thermostat body.

BULB ASSEMBLY

Gaskets Quantity Package (25) for TAC Pneumodular Control System

Aluminum Bulb Shield, Outdoor, 2”H x 11-¾”W x 1-⅛”D

Gray cover with Barber-Colman logo dial

Conversion Kit, Pneumatic, Wall Thermostat Mounting

Socket Assembly, Includes 1 MCS-PS, 1 MCS-G, 4 MCS-SCREW, 15 MCS-PLUG

Spring: 3-8 MK-7100-0-0-1

Gray cover with Barber-Colman logo dial

Tubing Connectors Quantity Package (50) for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Socket Assembly (includes one 22-130) for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Adaptor, brass, for mounting T150 Immersion Transmitter in Barber-Colman AT-201 or AT-203 well.

Mounting Plate For Mounting Any Two Single Function Room Controllers, 6-14”H x 6-¼”W x ¼”D

Resistor Kit, Converts and Interfaces a 4 to 20 mAdc External Signal to 1 to 11 Vdc Signal, 250 Ohm, +/-0.1% Tolerance, ½ Watt, T (6 Pack)

Plug Strip for TAC Pneumodular Control System

Mounting Base, Auxiliary, Single, 5-7/16”H x 3-⅞”W x ⅜”D

Voltage Divider

3/16 in. tygothane tubing assembly, with spring, two eyelets, and two barbed fittings for ¼ in. plastic tubing.

Aspirator Kit

Switch, TAC Erie Seasonal Changeover Snap-Acting SPDT, Color Coded, 36” Leads, Includes a Conduit Connection

Gray cover with Barber-Colman logo dial

THERMOSTAT CALIBRATION

Surface Mounting Base, Single, 4-⅝”H x 3-⅛”W x 1”D

Input Diaphragm Kit: RKS-1001 thru RKS-4002