Sensor Accessories

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

Snap-in “labor-saving” fitting for mounting 2 x 2 in. thermostats, humidistats, and transmitters on drywall having at least 3-½ in. studs.

AA Series duct static pickup probe, 8”, dry pressure

1/16 in. and ¼ in. hex head thermostat calibration and coverscrew wrench. (Also adjusts 2341 Series Receiver-Controllers.)

Wire Guard With Steel Base Plate, 4-¼”H x 1-⅝”W x 1-⅝”D

Pilot Restrictor Kit (All Relay Type Except -600)

1.0 scfh In-Line Restrictor.

Gasket for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Restrictor for copper fitting

Factory Authorized Parts™ - HH79HZ004 - THERMISTOR ASSEMBLY

AA Series room static pressure pickup

Thermostat conversion kit, white.

RH SENSOR 5% REPLACE ELEMENT

AA Series duct static pickup probe, 4”, dry pressure

Static Pressure Pickup Port: Wall mounted, Stainless steel wall plate with sinter vent, For use with Veris Px series sensors

Squeeze Bulb Pump With Valve For Testing pneumatic Controls And Actuators.

Electrical Contact Assembly for TAC Pneumodular Control System

Setpoint Knob Kit Fahrenheit,TK-1001 thru TK-1601

Pneumatic Capacitor

Packing Wrench For VB-121, VB-131, VB-151, VB-314, VB-324, VB-334, VB-354 Valves

Tee Restrictor, .0075”, For ¼” Plastic Tubing

1.0 scfh Restrictor Tee for Use with One-Pipe Thermostats or Transmitters (¼ in. polythylene or polyurethane tubing). Color: red.

3/16 in. tygothane tubing assembly, with spring, two eyelets, and two barbed fittings for ¼ in. plastic tubing.

Aspirator Kit

Check Valve for TAC Pneumodular Control System

Needle and Adaptor For Use With ¼” Plastic Tubing and AL-88 and AL-89 Test Fittings

Check valve tee. Mounts on upper end of 22-120 socket, permits connection to field-mounted devices.

0.5 scfh Restrictor Tee. Color: Light Green.

Gray cover with Barber-Colman logo dial

Mounting Bracket/Hardware

Duct Mounting. Kit For Pneumatic and ElectricTemperature Bulbs

Contact Burnishing Tool

Gray cover with Barber-Colman logo dial

STP Series pocket STP, 150 mm/5.91 in., stainless steel

STP Series pocket STP, 200 mm/7.87 in, stainless steel

Surface Mounting Base, Single, 4-⅝”H x 3-⅛”W x 1”D

Input Restrictor Kit: RKS-1001 thru RKS-4002 (1 Req. Per Input)

Mounting Hardware, TK-1xxx, -5xxx, Except TK-17xx, -18xx

Gray cover with Barber-Colman logo dial

Gray cover with Barber-Colman logo dial

Backplate

Gauge Overlay Kit 3-½ INCH

PNR-2042 (Schneider Electric)

THERMOMETER ASY FAR

Mounting Kit, Stick Pad \& Tie Wrap

MONT TRK (Schneider Electric)

SCW FILHD 6-32 .25 TAPTITE SLT

UTILITY BOX

Gray cover with Barber-Colman logo dial

Resistor Kit, 11K Ohm, +/-0.1% tolerance, ⅛ watt (12 Pack)

Restrictor .005” (Red)

RESTRICTOR

IMMER TEMP SENSOR

Pocket STP 250 mm (10 in) Stainless steel

Pocket STP 300 mm (11.81 in) Stainless steel

Pocket STP 400 mm (15.75 in) Stainless steel

2 IN BRASS WELL

STP Series Pocket STP, 50 mm/1.97 in., Stainless Steel