Sensor Accessories

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

1/16 in. and ¼ in. hex head thermostat calibration and coverscrew wrench. (Also adjusts 2341 Series Receiver-Controllers.)

AA Series duct static pickup probe, 8”, dry pressure

Dial Stop Kit

1.0 scfh In-Line Restrictor.

Restrictor for copper fitting

Klipet Capillary Clip

AA Series room static pressure pickup

AA Series duct static pickup probe, 4”, dry pressure

Dial Stop Pins, to Limit the High or Low Setting of Room Thermostats (100 Per Pack)

Setpoint Scale TK-17xx, 18xx, 55-85F/C

Squeeze Bulb Pump With Valve For Testing pneumatic Controls And Actuators.

Pneumatic Capacitor

STP Series pocket STP, 100 mm/3.94 in., brass

Lock Cover Screw Kit, to Prevent Unauthorized Tampering of Dial Setting or Internal Mechanism

1.0 scfh Restrictor Tee for Use with One-Pipe Thermostats or Transmitters (¼ in. polythylene or polyurethane tubing). Color: red.

Mounting Screw for TAC Pneumodular Control System

Sealing Plug for TAC Pneumodular Control System

Check valve tee. Mounts on upper end of 22-120 socket, permits connection to field-mounted devices.

Gray cover with Barber-Colman logo dial

0.5 scfh Restrictor Tee. Color: Light Green.

Duct Mounting. Kit For Pneumatic and ElectricTemperature Bulbs

Mounting Bracket/Hardware

Contact Burnishing Tool

Device Mounting Screw for TAC Pneumodular Control System

STP Series pocket STP, 150 mm/5.91 in., stainless steel

STP Series pocket STP, 200 mm/7.87 in, stainless steel

Pocket STP 150 mm (5.91 in) Brass

Pocket STP 200 mm (7.87 in) Brass

SEALING CAP

Ring Mtg Thermostat Accessory

Receiver Controller Setpoint Dial Labels, 40 to 240°F for use with P541 Series (2341-5xx Series)

Backplate

Gauge Overlay Kit 3-½ INCH

Diaphragm for R471, R472 (2364-200 Series)

DIAL (Schneider Electric)

Gray cover with Barber-Colman logo dial

THERMOMETER ASY FAR

LGT DUTY THERM DIAL

PNR-1043 (Schneider Electric)

THERMOMETER ASY CEL

Standard Bracket Kit

Receiver Controller Setpoint Dial Labels, 40 to 140°F for use with P541 Series (2341-5xx Series)

Resistor Kit, 11K Ohm, +/-0.1% tolerance, ⅛ watt (12 Pack)

Restrictor .005” (Red)

RESTRICTOR

IMMER TEMP SENSOR

Foam Backing Pad

Gray cover with Barber-Colman logo dial

Gray cover with Barber-Colman logo dial

KNOB FOR POT

Pocket STP 300 mm (11.81 in) Brass

STP Series Pocket STP, 50 mm/1.97 in., Stainless Steel

STP Series pocket STP, 100 mm/3.94 in., stainless steel

NUT HX 6-32 ¼ BRS NI

Pocket STP 50 mm (1.97 in) Brass

Pocket STP 250 mm (10 in) Brass

Pocket STP 400 mm (15.75 in) Brass

Stamped Metal, Mounting Ring, For Use With 2x2” Devices