Sensor Accessories

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

Snap-in “labor-saving” fitting for mounting 2 x 2 in. thermostats, humidistats, and transmitters on drywall having at least 3-½ in. studs.

1/16 in. and ¼ in. hex head thermostat calibration and coverscrew wrench. (Also adjusts 2341 Series Receiver-Controllers.)

AA Series duct static pickup probe, 8”, dry pressure

Wire Guard With Steel Base Plate, 4-¼”H x 1-⅝”W x 1-⅝”D

Dial Stop Kit

Pilot Restrictor Kit (All Relay Type Except -600)

1.0 scfh In-Line Restrictor.

Gasket for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Restrictor for copper fitting

Factory Authorized Parts™ - HH79HZ004 - THERMISTOR ASSEMBLY

Klipet Capillary Clip

AA Series room static pressure pickup

Thermostat conversion kit, white.

RH SENSOR 5% REPLACE ELEMENT

AA Series duct static pickup probe, 4”, dry pressure

Dial Stop Pins, to Limit the High or Low Setting of Room Thermostats (100 Per Pack)

Static Pressure Pickup Port: Wall mounted, Stainless steel wall plate with sinter vent, For use with Veris Px series sensors

Setpoint Scale TK-17xx, 18xx, 55-85F/C

Squeeze Bulb Pump With Valve For Testing pneumatic Controls And Actuators.

Electrical Contact Assembly for TAC Pneumodular Control System

Setpoint Knob Kit Fahrenheit,TK-1001 thru TK-1601

Pneumatic Capacitor

STP Series pocket STP, 100 mm/3.94 in., brass

Packing Wrench For VB-121, VB-131, VB-151, VB-314, VB-324, VB-334, VB-354 Valves

Remote Sample Pick-Up Kit: For Use With Veris CDR Series Products

Lock Cover Screw Kit, to Prevent Unauthorized Tampering of Dial Setting or Internal Mechanism

Tee Restrictor, .0075”, For ¼” Plastic Tubing

1.0 scfh Restrictor Tee for Use with One-Pipe Thermostats or Transmitters (¼ in. polythylene or polyurethane tubing). Color: red.

Mounting Screw for TAC Pneumodular Control System

Sealing Plug for TAC Pneumodular Control System

3/16 in. tygothane tubing assembly, with spring, two eyelets, and two barbed fittings for ¼ in. plastic tubing.

Aspirator Kit

Check Valve for TAC Pneumodular Control System

Needle and Adaptor For Use With ¼” Plastic Tubing and AL-88 and AL-89 Test Fittings

Check valve tee. Mounts on upper end of 22-120 socket, permits connection to field-mounted devices.

Gray cover with Barber-Colman logo dial

0.5 scfh Restrictor Tee. Color: Light Green.

Duct Mounting. Kit For Pneumatic and ElectricTemperature Bulbs

Mounting Bracket/Hardware

Contact Burnishing Tool

Device Mounting Screw for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

STP Series pocket STP, 150 mm/5.91 in., stainless steel

STP Series pocket STP, 200 mm/7.87 in, stainless steel

Neoprene Sealing Gasket Used When Mounting Devices on MCS-S (Order in Multiples of 25) List Price Noted is Each.

Factory Authorized Parts™ - HH79HZ003 - THERMISTOR ASSEMBLY

Replacement Humidity Element for Veris Sensors, 3% Accuracy

Switch, TAC Erie Seasonal Changeover Snap-Acting SPDT, Color Coded, 96” Leads, Includes a Conduit Connection

Pocket STP 150 mm (5.91 in) Brass

Pocket STP 200 mm (7.87 in) Brass

Surface Mounting Base, Single, 4-⅝”H x 3-⅛”W x 1”D

Input Restrictor Kit: RKS-1001 thru RKS-4002 (1 Req. Per Input)

Mounting Hardware, TK-1xxx, -5xxx, Except TK-17xx, -18xx

Gray cover with Barber-Colman logo dial

Gray cover with Barber-Colman logo dial

PNR-2042 (Schneider Electric)

Mounting Kit, Stick Pad \& Tie Wrap