Sensors

GAUGE

6900507 - HF

Inductive proximity sensors XS, inductive sensor XS6 M12, L54mm, brass, Sn4mm, 24...240VAC/DC, cable 2 m

80X80 NETWORK WALLPLATE; PLATE FOR MOUNTING A 80X80 NETWORK SENSOR ON A 2X4 WALLBOX IN EITHER VERT

Room Temperature Sensor, For Use with TEC Only

DANFOSS AVEO SENSORS, GAS, SENSOR TYPE: BUILT-IN SENSOR, 45 F - 82 F, RA, 015G4290 IS THE DIRECT REPLACEMENT FOR 013G8250

-40°/65°C Thermistor; 12” Leads

Gray cover with Barber-Colman logo dial

WMR/CLR TEMP SEN 1K NI WL; WALL MOUNT TEMPERATURE SENSOR;1K OHM NICKEL WARMER/COOLER

NI 1K MOD JACK/WARM/COOL; NICKEL 1K OHM W/MODULAR JACK AND WARMER/COOLER

PTC SILICON SENSOR; WITH PVC CABLE LENGTH 16 ⅜ FT (5 M) SENSOR RANGE -40 TO 212 DEGREES F

4611310 - FERRITE, BARREL, DC, CON. M12

Room Unit, Temperature, 1k Ohm (385a) Pt RTD

Temperature Sensor, Duct w/ Mounting Box, Probe Length: 12” (305mm), 10K T3, Thermistor, Resistive Output

T Series temperature sensor, duct with mounting Box, 8” probe, 10K type 3 thermistor, resistive output

PRESSURE CONTROL; 400-300 # OPENS ON RISE; AUTO RESET

Contact temperature sensor passive, Ni1000 (JCI)

ENCAPSUL PRESSURE CONTROL; 5-20# OPENS ON FALL; AUTO RESET CONDUIT CLAMP

PT 1K MOD JACK/WARM/COOL; PLATINUM 1K OHM W/MODULAR JACK AND WARMER/COOLER

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

Needle Probe, Prod Grp 19X, 0-30 psig, Calibration Cvr Wrench, 1-½” Dia Gauge

46522 - FERRITE, BARREL, DC, CON. M12

DIFF PRESS

Room Temperature Sensor, 1k Ohm (385a) Pt RTD

PTC SILICON SENSOR; WITH PVC CABLE LENGTH 6 ½ FT (2M) SENSOR RANGE -40 TO 212 DEGREES F

2005 MAGNEHELIC GAGE

TR40 WALL MODULE, TEMP, SYLK

Rectngular Proximity Sensr, Shlded, PNP, NO

T-slot cylinder sensor

4635692 - FERRITE, BARREL, DC, CON. M12

IME08-02BPSZT0S INDUCT.PROXIM.SENS.

1910-0 PRESS SW .15-.5 INWC

Inductive sensor

6” NI TEMP SENSOR FOR; SET-SCREW STYLE WELLS

Cover for Pressure Switch

TEMP SENSOR; 1000 OHM; NI; 8”; FOR DUCT MTG.

Inductive sensor

GAS TBL METHANE 100% LEL

20K WATER TEMP SENSOR, 5 IN.INSERTION

6-WIRE 2-RJ11 RS CABLE 50’PLMN

44065 - FERRITE, BARREL, DC, CON. M12

WELL TEMP SEN 6”10K; WELL INSERTION TEMPERATURE SENSOR 10K OHM THERMISTOR 6 IN. PROBE

46070 - FERRITE, BARREL, DC, CON. M12

MZC1-2V2PS-KRD MAGN.CYLINDER SENS.

Current Sensor: 4-20mA Analog Output, 0-30/60/120A field selectable Amp Range, Split-Core Housing, UL Listed for use on 75 deg. C insulated conductors

Duct Averaging Temp Sensor, 100k Ohm Thermistor, 36 Inch Flexible Probe

PRESSURE CONTROL; 410# OPENS ON RISE; MANUAL RESET

Duct Point Temp Sensor, 4 Inch Probe, For Use with TEC Only

ET Series temperature sensor, 4”, immersion, 10K ohm thermistor, Continuum compatible, steel enclosure

Replacement Filter Tip for QFM31xx Series Duct Sensors

Temp Sensor, 12’ Duct Ave, Flexible Copper, Acc: +/- 0.2 C, 10K Ohm Thermistor, I/NET

Temp Sensor, SS Wall Plate, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum, Schneider Electric Logo

Temp, Blank Front, 10k-Typ2, White,Talon

PTC SILICON SENSOR; WITH PVC CABLE LENGTH 9 ¾” (0.25 M) SENSOR RANGE -40

Air Pressure Switch 0.10 -10.0 WC

Current Sensor: 0-5VDC Analog Output, 0-30/60/120A field selectable Amp Range, Split-Core Housing, UL Listed for use on 75 deg. C insulated conductors

Current Sensor: 4-20mA Analog Output, 0-10/20/40 Amperage Range, Solid-Core Housing, UL Listed, CE

ET Series well, 4”, stainless steel

Bayonet Style Thermocouple Probes

Weather Shield for QFA31xx Series Humidity Sensors (Required for Outdoor Use)