Schneider Electric Sensors

Gray cover with Barber-Colman logo dial

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

TAC Pneumodular tubing - 100 Ft. Roll

Veris HW2 Series Humidity Sensor, Wall, Replaceable 2%, Temperature Transmitter

ET Series temperature sensor, 4”, immersion, 10K ohm thermistor, Continuum compatible, steel enclosure

Temp Sensor, SS Wall Plate, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum, Schneider Electric Logo

Sensor, Remote Balco Duct/Immersion Sensor, 6 in L, ¼ in NPT Mounting, 12 in Black Pigtail Leads, AT-226 Required

EH Series Room/Duct Humidity And Temperature Sensor, 2% Accuracy, Field Selectable Outputs, 10k Ohm T3 Thermistor, Continuum Compatible

SmartX Temperature Sensor, Resistive 10K Type 3 Thermistor, Blank, with Matte White Cover

ET Series temperature sensor, 12”, duct, 10K ohm thermistor, Continuum compatible, steel enclosure

Wire Guard With Steel Base Plate, 4-¼”H x 1-⅝”W x 1-⅝”D

Temp Sensor, 4” Immersion, Acc: +/- 0.1%, 1K Ohm BALCO, Steel Encl.

1/16 in. and ¼ in. hex head thermostat calibration and coverscrew wrench. (Also adjusts 2341 Series Receiver-Controllers.)

ET Series temperature sensor, 6”, duct, 1K ohm BALCO, steel enclosure

Temp Sensor, 8” Duct, Acc: +/- 0.2 C, 1.8K Ohm Thermistor, Vista, Steel Encl.

ET Series temperature sensor, 8”, duct, steel enclosure, 10k ohm thermistor, Continuum compatible

Cover Plate for Sensor Base for SmartX IP Controllers Override Setpoint - Sensor Base not Included

Temp Sensor, 6” Immersion, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum, Steel Encl.

STP Series pocket STP, 100 mm/3.94 in., brass

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Packing Wrench For VB-121, VB-131, VB-151, VB-314, VB-324, VB-334, VB-354 Valves

Duct Sensor with Junction Box

ET Series temperature sensor, 8”, averaging, steel enclosure, 10k ohm thermistor with 11k ohm Shunt, I/A compatible

ET Series Temperature Sensor, Room, 10k Ohm T3 Thermistor, Continuum Compatible

Sensor, SpaceLogic SLA Series, room, humidity, temperature, segmented LCD, analog outputs with matte white housing

ET Series temperature sensor, 4”, duct, 10k type III thermistor, plastic box

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Room Temp Sensor: 1.8K Ohm Thermistor for Vista Compatibility, RJ11 Communication Jack, SE Logo

ET Series temperature sensor, 2”, immersion, 10K ohm thermistor, Continuum compatible, steel enclosure

Veris TW2 Series Temperature Sensor, Wall, 10K Thermistor with 11K Shunt

Single point Field Calibration, Field selectable output signals, Plus or minus 2% Accuracies, Low Drift

Replacement Temperature Sensor, Direct Acting, For Use With T461 or T463

Temp Sensor, SS Wall Plate, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum

Room Temp Sensor: 1.8K Ohm Thermistor for Vista Compatibility, Thermometer Indicator, SE Logo

STP Series immersion temperature sensor, STP300-200 0/100, pipe, 200 mm probe, 2-Wire, 0-100 °C, accuracy 0.4%

STP Series immersion temperature sensor, STP300-100, pipe, 100 mm probe, 2-Wire, -50-50 °C, accuracy 0.4 %

Temp Sensor, 12” Duct, Acc: +/- 1.0 Ohm, 1K Ohm Platinum, No Encl.

Temp Sensor, 12” Duct, Acc: +/- 0.2 C, 10K Ohm Thermistor w/ 11K Shunt, I/A, No Encl.

Temp Sensor, 12” Duct, Acc: +/- 0.2 C, 10K Ohm Thermistor, Continuum, No Encl.

Temp Sensor, 12” Duct, Acc: +/- 0.2 C, 10K Ohm Thermistor, I/NET, No Encl.

Temp Sensor, 12” Duct, Acc: +/- 0.2 C, 1.8K Ohm Thermistor, Vista, No Encl.

Frost Thermostat: STT904, 12 m (39 ft) Capillary, Automatic, Air

STD Series temperature sensor, STD150, duct, TAC Vista And TAC Xenta compatible

Dial Stop Kit

Gray cover with Barber-Colman logo dial

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

Veris CW2 Series Value Air Quality Sensor, Wall, CO2, Analog Output

Single point Field Calibration, Field selectable output signals, Plus or minus 2% Accuracies, Low Drift

Sensor, SpaceLogic SLP Series, humidity, room, temperature, BACnet MSTP/Modbus, optimum Black housing

Sensor, SpaceLogic SLP Series, humidity, room, temperature, BACnet MSTP/Modbus, optimum white housing

Sensor, SpaceLogic SLP Series, humidity, room, temperature, BACnet MSTP/Modbus, matte white housing

Sensor, SpaceLogic SLA Series, humidity, room, temperature, analog outputs, optimum black housing

Sensor, SpaceLogic SLA Series, humidity, room, temperature, analog outputs, optimum white housing

Sensor, SpaceLogic SLA Series, humidity, room, temperature, analog outputs, matte white housing

Single point Field Calibration, Field selectable output signals, Plus or minus 2% Accuracies, Low Drift

Single point Field Calibration, Field selectable output signals, Plus or minus 2% Accuracies, Low Drift

Single point Field Calibration, Field selectable output signals, Plus or minus 2% Accuracies, Low Drift

RH2%/10k Type II Thermistor, Aries Enclosure with Override

RH2%/10k Type II Thermistor, Delta Enclosure with Override

RH and Temp Sensor: Duct, 2% Accuracy, Field Selectable Outputs, 1.8K Ohm Thermistor, Vista, TAC Label