Schneider Electric Sensors

Sensor, Remote Balco Duct/Immersion Sensor, 6 in L, ¼ in NPT Mounting, 12 in Black Pigtail Leads, AT-226 Required

Wire Guard With Steel Base Plate, 4-¼”H x 1-⅝”W x 1-⅝”D

Packing Wrench For VB-121, VB-131, VB-151, VB-314, VB-324, VB-334, VB-354 Valves

Duct Sensor with Junction Box

STP Series immersion temperature sensor, STP300-200 0/100, pipe, 200 mm probe, 2-Wire, 0-100 °C, accuracy 0.4%

STP Series immersion temperature sensor, STP300-100, pipe, 100 mm probe, 2-Wire, -50-50 °C, accuracy 0.4 %

Gray cover with Barber-Colman logo dial

Differential Air Pressure Trans: For the monitoring of air ducts, filters and fans, SPD310-100/300/500/1000Pa

SpaceLogic SLP Series Sensor, Room, Temperature, Segmented LCD, BACnet MSTP/Modbus Outputs with Matte White Housing

Veris TW2 Series Temperature Sensor, Wall, 1K Ohm Platinum RTD

ET Series temperature sensor, 8’, duct average, flexible copper, 10K ohm thermistor with 11K shunt, I/A compatible

Temp Sensor, 12’ Duct Ave, Flexible Copper, Acc: +/- 0.2 C, 10K Ohm Thermistor, I/NET

Temp Sensor, 12’ Duct Ave, Flexible Copper, Acc: +/- 0.2 C, 1.8K Ohm Thermistor, Vista, Steel Encl.

ET Series temperature sensor, 8’, duct average, flexible copper, 10K ohm thermistor, Continuum compatible

SmartX Temperature Sensor, Resistive 10K Type 3 Thermistor, Blank, with Optimum Black Cover

SmartX Temperature Sensor, Resistive 10K Type 3 Thermistor, Blank, with Optimum White Cover

SpaceLogic SLA Series Temperature Sensor, Blank Cover, BACnet MSTP/Modbus Outputs, Optimum Black Housing

SpaceLogic SLA Series Temperature Sensor, Blank Cover, BACnet MSTP/Modbus Outputs, Optimum White Housing

SpaceLogic SLA Series Sensor, Room, Temperature, Segmented LCD, Analog Outputs with Matte White Housing

SpaceLogic SLA Series Temperature Sensor, Blank Cover, BACnet MSTP/Modbus Outputs, Matte White Housing

ET Series temperature sensor, 12’, duct average, flexible copper, 10K ohm thermistor with 11K shunt, I/A compatible

ET Series temperature sensor, 12’, duct average, flexible copper, 10K ohm thermistor, Continuum compatible

Temp Sensor, 8’ Duct Ave, Flexible Copper, Acc: +/- 0.2 C, 10K Ohm Thermistor, I/NET

Temp Sensor, 8’ Duct Ave, Flexible Copper, Acc: +/- 0.2 C, 1.8K Ohm Thermistor, Vista

10k Type III Thermitor, 4 in. Immersion sensor, Nema 4X Box, No Well

IMMERSION TEMPERATURE SENSOR

STP Series pipe temperature sensor, immersion, 70 mm probe, Vista compatible, 1.8k ohm

Pipe Temperature Sensor, Immersion pipe mounting, 120 mm Probe length, Vista Compatible, 1.8K Ohm

Temp Sensor, Duct Mount, 413 NL mm, 16.26”, 0.30 lb Weight

Strap-on Changeover Thermostat, 120/240V, 75F Fixed Set Point

Adaptor Kit

Gauge tap adaptor for T15 or T16 only. One end accepts ⅛ in. MPT gauge, other end screws into thermostat body.

Base For Field Mounting Pneumodular Receiver-Controller, Plus Two 2” Receiver Gauges and Two 1-½” Pressure Gauges, Direct Acting

Tubing Connectors Quantity Package (50) for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Socket Assembly (includes one 22-130) for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Adaptor, brass, for mounting T150 Immersion Transmitter in Barber-Colman AT-201 or AT-203 well.

Mounting Plate For Mounting Any Two Single Function Room Controllers, 6-14”H x 6-¼”W x ¼”D

Resistor Kit, Converts and Interfaces a 4 to 20 mAdc External Signal to 1 to 11 Vdc Signal, 250 Ohm, +/-0.1% Tolerance, ½ Watt, T (6 Pack)

Mounting Base, Auxiliary, Single, 5-7/16”H x 3-⅞”W x ⅜”D

Plug Strip for TAC Pneumodular Control System

Voltage Divider

3/16 in. tygothane tubing assembly, with spring, two eyelets, and two barbed fittings for ¼ in. plastic tubing.

Thermostat conversion kit, white.

Aspirator Kit

Gray cover with Barber-Colman logo dial

Replaceable sensor, SpaceLogic SLX HS Series, humidity, gen 2, 2% accuracy

Capsule type, multi-purpose temperature sensor

Room Temp Sensor: 1.8K Ohm Thermistor for Vista Compatibility, LCD (displays in °F), RJ11 Communication Jack, SE Logo

BEAD TEMP SENSOR 40-IN. LEADS

6 IN. SS MACHINED WELL

STD Series temperature sensor, STD591, average duct, Continuum compatible

SENSOR DUCT STD100-250 (512301

Restrictor Kit (All Bleed Bulb Type) TK-2xxx, TK-3xxx, TK-4xxx

Sub-Base, Duplex Thermostat Selector Switch, DP4T, For Use With All Duplex or Two-Stage Electric Room Thermostats

TSP MOUNTING BRACKET

6-527 (Schneider Electric)

Arc Suppressor (For Floating Type Control)

Switchover Kit: TK-1201, 1301, 1601