Resideo VR8300C4506

Single Stage, 24 Vac, Step Opening, Standing Pilot. ¾ x ¾ in Step rate 0.9 in WC, Full Rate 3.5 in WC

24 Vac Dual Standing Pilot Gas Valve with ¾ in. x ¾ in. inlet\outlet, step opening and Full Rate: 3.5 in. wc; Step Setting: 0.9 in. wc pressure regulator setting

Features

• Combination gas control for use in 24 Vac, gas-fired, standing pilot appliances with capacities from 30 to 300 cfh.

• Controls include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.

• Compact size.

• Provide two automatic valves.

• Solenoid-operated first automatic valve opens on thermostat call for heat; closes when call for heat ends.

• Diaphragm-operated second automatic valve opens under control of regulator; closes if gas or power supply is interrupted.

• Meet codes requiring dual safety shutoff.

• Natural to LP and LP to Natural conversion kits available for standard and slow opening gas valves.

• LITE-RITE (OFF-PILOT-ON) lighting sequence.

• All adjustments, wiring connections and pilot outlet are accessible from top of control.

• Adjustable servo regulator effectively maintains almost constant gas output pressure under wide fluctuations in gas supply pressure.

• Compatible with ECO connector.

Product Specifications

Type: Single Stage

Ignition Type: Standing Pilot

Type of Gas: Natural

Inlet/Outlet Size (in.): ¾ in. x ¾ in.

Body Pattern: Straight through with integral tapping; with flange

Opening Characteristics (standard, step): Step Opening

Capacity @ 1 in. p.d.: 200,000 BTU/hr; 30,000 BTU/hr minimum

Pressure Ratings: ½ psi, or 3.5 kPa

Pressure Regulator Setting(psi): Full Rate: 3.5 in. wc; Step Setting: 0.9 in. wc

Pressure Regulator Setting(kPa): Full Rate: 0.87 kPa; Step Setting: 0.22 kPa

Pilot Gas Outlet: Compression fitting for ¼ in. OD tubing

Pressure Tapping: ⅛ in. NPT with plug

Electrical Connections: ¼ in. quick-connect male terminals

Electrical Ratings: 24 Vac

Frequency: 60 Hz

Anticipator Setting: 0.7 A

Temperature Range: 0° to 175°F, or -18° to +79°C

Mounting: 0 to 90 degrees in any direction from the upright position of the gas control knob, including vertically

Dimensions (in.): 5 ⅜ in. high x 4 1/16 in. wide x 2 11/16 in. deep

Dimensions (mm): 135 mm high x 104 mm wide x 69 mm deep

Includes: Two ¾ x ½ in. reducer bushings

Approvals, American Gas Association IAS: AGA Design Certified: File No. L2025006.

Approvals, Canadian Gas Association: CGA Design Certified: File No. L2025006.