Fireye HVAC/R

UV self-check scanner, 1” NPT, 102 - 264 VAC shutter. Use with 72DUVS4, 72DUVS1T, BurnerLogix, E-Series, MicroM, FlameWorx II.

Chassis UV Self Check 120V

120 VAC, 50/60 Hz Chassis.

120 VAC, 50/60 Hz Chassis with standard plug-in daughter board

Ultraviolet amplifier, use with UV1, UV2, UV8, UV90, or 45UV3.

2 line x 16 character backlit LCD display with keypad.

½” NPT straight UV scanner, 6 ft flex conduit with insulated nylon coupling.

Ultraviolet self check amplifier. Use with 45UV5-1005, -1007, -1008, -1009, or 55UV5-1007, -1009.

Firetron cell for 48PT2 only.

Pressure Transducer

Open wiring base for cabinet mtg., use with D Series and FLAME-MONITOR.

Infrared scanner, 8’, 90 degree head, BurnerLogix, E-Series, MicroM

Display 2 Lines 16 Characters

Infrared autocheck amplifier, use with 48PT2.

SERVO-Motor 24VDC

UV Scanner

Programmer, Selectable recycle/non-recycle function, TFI timing, purge timing, post purge, prove open at start.

InSight II Flame Scanner - Dual detector (IR and UV) with single quick disconnect to connect to InSight I cable connector (e.g., 129-164). NEMA 4X,…

Control, consisting of EB700, 48-1836, EC600. 120 VAC. Display ordered separately. UL, FM, UL/c Approved.

Infrared scanner, 8’, straight head, BurnerLogix, E-Series, MicroM

Programmer Module 10 STFI Select Purge

Keypad selectable parameters, non-recycle operation, modulation, open/closed damper proving, 4 second FFRT

Flame Sensor Module UV/UV-Self Check

UV self-checking, 1 inch NPT mount, 60 Hz. Use with 25SU3 and 25SU5.

Flame rect amp. 2-4 sec FFRT. Use with 69ND, 45CM.

Infrared scanner, 4’, 90 degree head, BurnerLogix, E-Series, MicroM

UV amp, 2-4 sec FFRT. Use with UV1, UV2, 45UV3.

1” NPT self-check UV scanner

Union with quartz lens, ½” for UV1A.

Infrared scanner, 4’, straight head, BurnerLogix, E-Series, MicroM

Ultraviolet self-check amplifier, 2-4 sec FFRT, use with 45UV5-1007, -1008, -1009.

UV self-check scanner. Meets Class 1, Div 2, Groups A, B, C, and D, NEMA 4X. 1” NPT, 102 - 260 VAC, 50/60 Hz.

Scanner ½ NPT 12 ft UV

UV amp, .8 sec FFRT. Use with UV1, UV2, 45UV3.

UV Scanner ½ 90 Deg 6 ft

Chassis, 120 VAC, 50/60 Hz with UV non self-check amplifier. UL, FM, CE Approved.

Temperature Sensor 32 Deg-752 Deg F

Temperature sensor, Range 32 deg. F to 752 deg. F (0 deg. C to 400 deg. C), 4-20 mA output, linear with temperature

Keypad/Display, 2 line X 16 characters, LIQUID CRYSTAL DISPLAY (LCD), with cable. Operates -4F (-20C) to +140F (+60C).

Flame A. Module

UV, integrated flame scanner, 24 VDC, 1” NPT, 4 sec FFRT w/ 4-20 mA with quick disconnect. Use 59-598-xx cable. FM approved.

120 VAC, 50/60 Hz Chassis with alpha-numeric display interface to ED510.

Closed wiring base for surface mtg., use with D Series and FLAME-MONITOR.

Expansion module - use with E100/E110/E201/E211

UV Tube

InSight I Flame Scanner - Dual detector (IR and UV) with quick disconnect. FM, UL/c Approved.

Amplifier, for use with EP178 / EP378 and one or two 85UVF4-1QDWR, 85IRF4-1QDWR, or InSight flame scanners (with 59-497-020WR cable).

UV Scanner Standard Mount with Tube

Infrared autocheck amplifier, use with 48PT2. Special application only, consult factory.

UV self-check scanner, 1” NPT, 8’ lead, use with P-Series or MicroM / E-Series/BurnerLogix with 61-5745-3 drive circuit.

Expansion module wiring base.

Chassis, 120 VAC, 50/60 Hz with IR Auto-Check amplifier. UL, FM, CE Approved.

Micro M Chassis

Replacement Power Module for Multi-flame system.

Vacuum Fluorescent Display (VFD) for InSight II flame scanner.

Replacement O2 probe for NX224455. Does not include mounting flange, ambient air sensor, or transformer.

Display module for 25SU5-5011/50125166/5168.

InSight II Flame Scanner - Dual detector (IR and UV) with quick disconnect. NEMA 4X, FM, UL/c, CE Approved. Use 59-546-xx and 59-547-xx cables. Req…

Flange, FXIATS-140 Sensor Kit, 16” insertion, includes the ambient temperature sensor, and mounting flange.

12” (diagonal) color touch screen display for PPC4000 and NXF4000. Uses 59-565 cable.