Fireye HVAC/R

Chassis UV Self Check 120V

120 VAC, 50/60 Hz Chassis.

120 VAC, 50/60 Hz Chassis with standard plug-in daughter board

Ultraviolet amplifier, use with UV1, UV2, UV8, UV90, or 45UV3.

2 line x 16 character backlit LCD display with keypad.

½” NPT straight UV scanner, 6 ft flex conduit with insulated nylon coupling.

Ultraviolet self check amplifier. Use with 45UV5-1005, -1007, -1008, -1009, or 55UV5-1007, -1009.

Firetron cell for 48PT2 only.

Pressure Transducer

Open wiring base for cabinet mtg., use with D Series and FLAME-MONITOR.

Infrared scanner, 8’, 90 degree head, BurnerLogix, E-Series, MicroM

Display 2 Lines 16 Characters

Infrared autocheck amplifier, use with 48PT2.

SERVO-Motor 24VDC

Programmer, Selectable recycle/non-recycle function, TFI timing, purge timing, post purge, prove open at start.

Infrared scanner, 8’, straight head, BurnerLogix, E-Series, MicroM

Programmer Module 10 STFI Select Purge

Keypad selectable parameters, non-recycle operation, modulation, open/closed damper proving, 4 second FFRT

Flame Sensor Module UV/UV-Self Check

Flame rect amp. 2-4 sec FFRT. Use with 69ND, 45CM.

Infrared scanner, 4’, 90 degree head, BurnerLogix, E-Series, MicroM

UV amp, 2-4 sec FFRT. Use with UV1, UV2, 45UV3.

1” NPT self-check UV scanner

Union with quartz lens, ½” for UV1A.

Infrared scanner, 4’, straight head, BurnerLogix, E-Series, MicroM

Scanner ½ NPT 12 ft UV

UV amp, .8 sec FFRT. Use with UV1, UV2, 45UV3.

UV Scanner ½ 90 Deg 6 ft

Chassis, 120 VAC, 50/60 Hz with UV non self-check amplifier. UL, FM, CE Approved.

Temperature Sensor 32 Deg-752 Deg F

Temperature sensor, Range 32 deg. F to 752 deg. F (0 deg. C to 400 deg. C), 4-20 mA output, linear with temperature

Keypad/Display, 2 line X 16 characters, LIQUID CRYSTAL DISPLAY (LCD), with cable. Operates -4F (-20C) to +140F (+60C).

120 VAC, 50/60 Hz Chassis with alpha-numeric display interface to ED510.

Closed wiring base for surface mtg., use with D Series and FLAME-MONITOR.

UV Tube

Amplifier, for use with EP178 / EP378 and one or two 85UVF4-1QDWR, 85IRF4-1QDWR, or InSight flame scanners (with 59-497-020WR cable).

UV Scanner Standard Mount with Tube

Infrared autocheck amplifier, use with 48PT2. Special application only, consult factory.

Expansion module wiring base.

Chassis, 120 VAC, 50/60 Hz with IR Auto-Check amplifier. UL, FM, CE Approved.

Micro M Chassis

Replacement Power Module for Multi-flame system.

Vacuum Fluorescent Display (VFD) for InSight II flame scanner.

Display module for 25SU5-5011/50125166/5168.

NEMA 4 UV Scanner, ½” NPT, 11 ft shielded cable with insulated nylon coupling.

Flame sensor module, FR, 120 VAC, 1 second FFRT, CE Approved, to be used with stand-alone wiring base (60-2886). (NOT FOR SALE IN US).

BurnerPRO Single Burner Control, 110VAC 50/60Hz, Series 6 timings (EP160), with UV non-self check amplifier, IP40. Compatible with 60-2981-1 and Si…

Alpha-numeric remote display with keypad

25SU3-5166, -5168 wiring base.