Fireye All Products

Chassis, For manually ignited burners, 120 VAC.

Parallel Positioning Control

Flame amplifier, 120/230 VAC, high discrimination. Consists of 60-2203-2, 60-2207-2, and 60-2301.

InSight II Flame Scanner - Dual detector (IR and UV) with single quick disconnect to connect to InSight I cable connector (e.g., 129-164). NEMA 4X,…

InSight I Flame Scanner - Dual detector (IR and UV) with Exd IIC T6, ATEX approved housing. NOT FOR SALE IN US

Infrared A 2 to 4 sec.

Flame rectification amplifier, 2-4 sec FFRT, use with 45CM or 69ND.

19 inch rack amplifier, 24 VAC/24VDC. CE Approved.

19 inch rack amplifier, 24 VAC/24VDC.

InSight I Flame Scanner - Dual detector (IR and UV) with 10’ leads and cable gland. FM, UL/c Approved.

Flame amplifier, 120 VAC, high sensitivity. Consists of 60-2204-2, 60-2207-1, and 60-2301.

Ultraviolet amplifier, 2-4 sec FFRT, use with UV1, UV2, 45UV3.

UV self-checking, 1 inch BSP mount, 50 Hz. Use with 25SU3 and 25SU5. NOT FOR SALE IN US

UV self-checking, 1 inch BSP mount, 60 Hz. Use with 4169T, code 18 and higher. NOT FOR SALE IN US

Multi-Flame System, 120 VAC, 50/60 Hz consisting of motherboard (MB-600M), relay board (MB-600R), logic module (MB-600L), and power module (MB-600P…

Infrared auto-check amplifier (for special application - consult factory), 1 sec FFRT, use with 48PT2.

Infrared auto-check amplifier, 1 sec FFRT, use with 48PT2.

Flame amplifier (High discrimination) for 5012, 5166, 5167.

110 VAC input/24 VDC, 2.5 amps output power supply. Includes 60-2482 connector.

Rack mounted controller for C9701 and C9707 non-incendive scanners.

InSight Series IV Flame Scanner - Ultra-violet with quick disconnect. NEMA 4X,FM, UL/c Approved. Use 59-547-xx cable.

10 ft, (3048 mm) Fiber Optic bundle - quartz.

NEMA 7, Class 1, Div 1 and 2, Groups C and D; Class 2, Div 1 and 2, Groups E, F, and G housing with 45UV5-1005 scanner.

InSight Series IV Flame Scanner - Infra-red with quick disconnect. NEMA 4X, FM, UL/c Approved. Use 59-547-xx cable.

InSight II Flame Scanner - Dual detector (IR and UV) with quick disconnect. NEMA 4X, FM, UL/c, CE Approved. Use 59-546-xx and 59-547-xx cables. Req…

Ultraviolet self-check amplifier, use with 45UV5-1006.

IR scanner with ¾” purge hole and military connector. DE601-108A and DE601-104D.

Luminescent scanner with ¾” purge hole and military connector. DE601-114 and DE601-104D.

Infrared auto-check amplifier (for special application - consult factory), use with 48PT2.

IR scanner with ¾” purge hole and 50’ lead wires. DE601-108A and DE601-104F.

Luminescent scanner with ¾” purge hole and 50’ lead wires. DE601-114 and DE601-104F.

Scanner electronics assembly C9502N Series.

Conformally coated scanner electronics assembly C9502N Series.

Electronics assembly for C9504M-001 fiber optic scanner Series.

Scanner electronics assembly C9502Q Series.

Electronics assembly for C9503M-001 fiber optic scanner Series.

Controller, panel mounted, for C9501, C9502, C9507, C9503M, C9503P, C9504M, and C9504P scanners.

InSight I Flame Scanner- Dual detector (IR and UV) with EExd IIC T6, ATEX approved housing. Scanner and housing CE Approved. NOT FOR SALE IN US

Cenelec EExd IIC explosion proof housing with 45UV5-1101 scanner. Includes 35-130 mounting flange. NOT FOR SALE IN US

Cenelec EExd IIC explosion proof housing with 45UV5-1000 scanner. Includes 35-128 mounting flange. NOT FOR SALE IN US

19 inch rack amplifier, 24 VAC/24VDC, high noise immunity

Rack mounted controller, jumper selectable voltage and FFRT.

Replacement scanner for 95DSS2E-1CEX. NOT FOR SALE IN US.

Replacement scanner for 95DSS2-1CEX. NOT FOR SALE IN US.

NEMA 7, Class 1, Div 1 and 2, Groups C and D; Class 2, Div 1 and 2, Groups E, F, and G explosion proof housing with 45UV5-1101 scanner.

NEMA 7, Class 1, Div 1 and 2, Groups C and D; Class 2, Div 1 and 2, Groups E, F, and G explosion proof housing with 45UV5-1000 scanner.

Metal sheathed glass fiber optic bundle (85”) used with C9503M, C9503P, and C9504M.

Metal sheathed glass fiber optic bundle (120”) used with C9503M, C9503P, and C9504M.

Metal sheathed glass fiber optic bundle (100”) used with C9503M, C9503P, and C9504M.

InSight I Flame Scanner - Dual detector (IR and UV) with 10’ leads and cable gland. CE Approved.

InSight I Flame Scanner - Dual detector (IR and UV) with quick disconnect. CE Approved.