Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/1K-NI-PO-4"-6'CL2P

SKU: CS6290642MPN: A/1K-NI-PO-4"-6'CL2PAlternate Part #: 148896

1,000 Ohm Nickel RTD, Probe Only, 4”, 6’ Plenum Cable

ACI A/1.8K-PO-2"-6'CL2P, A/100-2W-PO-4"-6'CL2P, A/100-3W-PO-2"-10'CL2P, A/100-3W-PO-4"-10'CL2P, A/100-3W-PO-4"-20'CL2P, A/100-3W-PO-4"-6'CL2P, A/100KS-PO-6"-10'CL2P, A/10K-E1-PO-2"-10'CL2P, A/10K-E1-PO-2"-20'CL2P, A/10K-E1-PO-4"-10'CL2P-NIST, A/10K-E1-PO-4"-20'CL2P, A/1K-2W-PO-2"-10'CL2P, A/1K-2W-PO-2"-10'CL2P-NIST, A/1K-2W-PO-2"-6'CL2P, A/1K-2W-PO-4"-10'CL2P
Contact us for pricing and availability

Product Details

1,000 Ohm Nickel RTD, Probe Only, 4”, 6’ Plenum Cable

Product Configuration

NIST None
Wire 6’ Plenum Cable - CL2P
Length 4”

Product Family Specifications

Stability +/- 0.05% after 1000 Hours @ 150ºC (302ºF)
Number Wires Two (Non-Polarity Sensitive)
Probe Diameter 0.250” (6.35mm)
Probe Material 304 Stainless Steel
Product Weight 4” \= 0.028 lbs. (12.7g) 6” \= 0.036 lbs. (16.3g) 8” \= 0.044 lbs. (20g) 12” \= 0.066 lbs. (29.9g) 18” \= 0.09 lbs. (40.8g)
Sensor Accuracy -40ºC (-40ºF): +/- 1.52ºC (+/- 2.73ºF) 0ºC (-40ºF): +/- 0.4ºC (+/- 0.72ºF) 21.1ºC (70ºF): +/- 0.17ºC (+/- 0.34ºF) 54.4ºC (130ºF): +/- 0.56ºC (+/- 1.00ºF) 121ºC (250ºF): +/- 1.25ºC (+/- 2.25ºF)
Agency Approvals CE, RoHS2, WEEE
Rated Application CL2P: Suitable for Indoor and Outdoor (wet) locations. Oil, Gas, Sunlight, Abrasion Acid Resistant
Conductor Material CL2P: Tinned Copper
Number Sensing Points One
Operating Humidity Range 10 to 95% RH, non-condensing
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Power Dissipation Constant 0.3ºC/mW (Still Air) | 5 mA
Sensor Type | Sensor Curve Nickel RTD | PTC (Positive Temperature Coefficient)
Operating Temperature Range CL2P: -80°C (-112°F) to 150°C (302°F)
Lead Length | Conductor Size 4”, 6” and 8” Probes: 14” (35.6 cm) | 12” and 18” Probes: 24” (61cm) | 22 AWG (0.65mm)
Sensor Output @ 25ºC (77ºF) 1000 Ohms nominal | (Red/Red)
Response Time (63% Step Change) 8 Seconds nominal
Lead Wire Insulation | Wire Rating CL2P: FEP (Fluorinated Ethylene Propylene) | TYPE CL2P - TYPE CMP 22 AWG (UL), C(UL) FEP/FEP E130356 ROHS
Din Standard | Temperature Coeffcient Din 43760 | 6370 ppm/ºC

Specifications

SKUCS6290642
MPNA/1K-NI-PO-4"-6'CL2P
Alternate Part #148896

You may also like