ACI A/1K-2W-PO-6"-6'CL2P
SKU: CS6287631MPN: A/1K-2W-PO-6"-6'CL2PAlternate Part #: 135807
1,000 Ohm (Two Wires) RTD, Probe Only, 6”, 6’ Plenum Cable
Contact us for pricing and availability
Product Details
1,000 Ohm (Two Wires) RTD, Probe Only, 6”, 6’ Plenum Cable
Product Configuration
| Wire | 6’ Plenum Cable - CL2P |
|---|---|
| Length | 6” |
| Sensor | 1K-2W (1,000 Ω, 2 wires) |
Product Family Specifications
| Stability | +/- 0.03% after 1000 Hours @ 300ºC (572ºF) |
|---|---|
| Number Wires | A/100-2W-PO-XX” Series and A/1K-2W-PO-XX Series: Two (Non-Polarity Sensitive) A/1K-2W-PO-XX” Series and A/1K-3W-PO-XX Series: Three (Polarity Sensitive) |
| Probe Material | 0.250” (6.35mm) |
| Product Weight | 4” \= 0.028 lbs. (12.7g) 6” \= 0.036 lbs. (16.3g) 8” \= 0.044 lbs. (20g) 12” \= 0.066 lbs. (29.9g) 18” \= 0.09 lbs. (40.8g) |
| Sensor Accuracy | +/- 0.06% Class A (Tolerance Formula: +/- ºC \= (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC) -40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF) | 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF) | 200ºC (392ºF): +/- 0.55ºC (+/- 0.99ºF) |
| Agency Approvals | CE, RoHS2, WEEE |
| Rated Application | CL2P: Suitable for Indoor and Outdoor (wet) locations. Oil, Gas, Sunlight, Abrasion Acid Resistant |
| Conductor Material | CL2P: Tinned Copper |
| Operating RH Range | 10 to 95% RH, non-condensing |
| Number Sensing Points | One |
| Storage Temperature Range | -40 to 85ºC (-40 to 185ºF) |
| Sensor Type | Sensor Curve | Platinum RTD | PTC (Positive Temperature Coefficient) |
| Operating Temperature Range | -55°C (-67°F) to 200°C (392°F) |
| Lead Length | Conductor Size | 4”, 6” and 8” Probes: 14” (35.6 cm) | 12” and 18” Probes: 24” (61cm) | 22 AWG (0.65mm) |
| Sensor Output @ 0ºC (32ºF) | A/100-xW-PO Series: 100 Ohms nominal | A/1K-xW-PO Series: 1000 Ohms nominal |
| Response Time (63% Step Change) | 8 Seconds nominal |
| Cable Operating Temperature Range | CL2P: -80°C (-112°F) to 150°C (302°F) |
| Lead Wire Insulation | Wire Rating | CL2P: FEP (Fluorinated Ethylene Propylene) | TYPE CL2P - TYPE CMP 22 AWG (UL), C(UL) FEP/FEP E130356 ROHS |
| Din Standard | Temperature Coeffcient | DIN EN 60751 (IEC 751) | 3850 ppm / ºC |
| Self-Heating | Maximum Operating Current | 100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA | 1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA |
Specifications
| SKU | CS6287631 |
|---|---|
| MPN | A/1K-2W-PO-6"-6'CL2P |
| Alternate Part # | 135807 |
You may also like
ACI A/1K-2W-PO-2"-6'CL2P
Contact us for pricing and availabilityACI A/1K-2W-PO-6"-10'CL2P
Contact us for pricing and availability
ACI A/1K-2W-PO-6"
Contact us for pricing and availabilityACI A/1K-2W-PO-8"-20'CL2P
Contact us for pricing and availabilityACI A/1K-2W-PO-4"-20'CL2P
Contact us for pricing and availabilityACI A/1K-2W-PO-2"-10'CL2P
Contact us for pricing and availabilityACI A/1K-2W-PO-4"-10'CL2P
Contact us for pricing and availabilityACI A/1K-3W-PO-2"-6'CL2P
Contact us for pricing and availabilityACI A/1K-3W-PO-4"-6'CL2P
Contact us for pricing and availabilityACI A/100-2W-PO-4"-6'CL2P
Contact us for pricing and availability
ACI A/1K-2W-PO-12"-20'CL2P-NIST
Contact us for pricing and availabilityACI A/1K-2W-PO-2"-10'CL2P-NIST
Contact us for pricing and availability
