ACI RH3-1K-NI-SP-010

Name: ACI RH3-1K-NI-SP-010
Brand: ACI
SKU: CS6289827
Availability: OutOfStock

SKU: CS6289827MPN: RH3-1K-NI-SP-010Alternate Part #: 147112

Relative Humidity, RH Outputs: 0-5 \& 0-10 VDC (Default), Wall Plate 304SS, ± 3% Accuracy, 1,000 Ohm Nickel RTD

ACI A/RH2-1.8K-SP-010, A/RH2-100-3W-SP-010, A/RH2-10K-E1-SP-010, A/RH2-1K-2W-SP-010, A/RH2-1K-2W-SP-010-NIST, A/RH2-1K-NI-SP-010, A/RH2-20K-SP-010, A/RH2-20K-SP-010-NIST, A/RH2-3K-SP-010, A/RH2-50K-SP-010, A/RH2-50K-SP-05, A/RH2-AN-SP-010, A/RH2-AN-SP-05, A/RH2-CP-SP-010, A/RH2-CP-SP-05

Product Details

Relative Humidity, RH Outputs: 0-5 \& 0-10 VDC (Default), Wall Plate 304SS, ± 3% Accuracy, 1,000 Ohm Nickel RTD

Product Configuration

Humidity Output	0-10VDC
Accuracy (Humidity)	+/-3%

Product Family Specifications

Product Weight	0.235 lbs. (0.107 kg)
RH Sensor Type	Capacitive with Hydrophobic Filter
Agency Approvals	CE, RoHS, WEEE
RH Output Signal	3-wire: 0-5 or 0-10 VDC
RH Supply Voltage	0-5 VDC: 12 - 40 VDC / 18 - 28 VAC 0-10 VDC: 18 - 40 VDC / 18 - 28 VAC Note: Reverse Polarity Protected
Operating RH Range	0 to 95% RH, non-condensing (Conformally Coated PCB’s)
Product Dimensions	4.51” (114.56 mm) x 2.76” (70.10 mm) x 1.25” (31.75 mm)
Insulation \| Rating	Etched Teflon (PTFE) Colored Leads \| Mil Spec 16878/4 Type E
RH NIST Test Points	Default Test Points: 3 Points (20%, 50% \& 80%)
Wall Plate Material	430 Stainless Steel (Brushed Stainless Steel Finish)
Nickel RTD Stability	+/-0.05% after 1000 Hours @ 302°F (150°C)
RH Measurement Range	0-100%
RH Response Time (T63)	20 Seconds Typical
RH Supply Current (VA)	8 mA maximum (0.32 VA)
Connections \| Wire Size	Screw Terminal Blocks (Polarity Sensitive) \| 16 (1.31 mm²) to 26 AWG (0.129 mm²)
Nickel RTD Din Standard	Din 43760
Temperature Coefficient	6370 ppm/°C
Foam Flammability Rating	FMVSS-302
Sintered Filter Material	304 Series Stainless Steel
RH Output Load Resistance	4K Ohms Minimum
Storage Temperature Range	-40 to 149°F (-40 to 65°C)
Nickel RTD Sensor Accuracy	32°F (0°C): +/-0.72°F (0.4°F) \| 70°F (21.1°C): +/-0.34°F (0.17°C) \| 130°F (54.4°C): +/-1.00°F (0.56°C)
Operating Temperature Range	-40 to 140°F (-40 to 60°C)
RH Accuracy @ 77°F (25°C)	Model Dependent: +/- 2%, or 3% from 10 to 95%
Lead Length \| Conductor Size	14” (35.6 cm) \| 22 AWG (0.65 mm)
Terminal Block Torque Rating	4.43 to 5.31 lb-in (0.5 to 0.6 Nm)
Foam Material \| Foam Thickness	Cross-linked LPDE (White) \| 0.25” (6.35 mm)
RH Transmitter Stabilization Time	30 Minutes (Recommended time before doing accuracy verification)
RH Stability \| Repeatability \| Sensitivity	Less than 2% drift / 5 years \| 0.5% RH \| 0.1% RH
Nickel RTD (PTC) Output @70°F (21.1°C) (Wire Colors)	RHx-1K-NI-SP Series: 1000 Ohms nominal (1K-Nickel RTD) \| Red/Red