Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/RH3-1K-2W-SP-010

SKU: CS6288043MPN: A/RH3-1K-2W-SP-010Alternate Part #: 138368

Relative Humidity, RH Outputs: 0-5 \& 0-10 VDC (Default), Wall Plate 304SS, ± 3% Accuracy, 1,000 Ohm RTD (Two Wires)

ACI A/RH2-1.8K-SP-010, A/RH2-100-3W-SP-010, A/RH2-10K-E1-SP-010, A/RH2-1K-2W-SP-010, A/RH2-1K-2W-SP-010-NIST, A/RH2-1K-NI-SP-010, A/RH2-20K-SP-010, A/RH2-20K-SP-010-NIST, A/RH2-3K-SP-010, A/RH2-50K-SP-010, A/RH2-50K-SP-05, A/RH2-AN-SP-010, A/RH2-AN-SP-05, A/RH2-CP-SP-010, A/RH2-CP-SP-05
Contact us for pricing and availability

Product Details

Relative Humidity, RH Outputs: 0-5 \& 0-10 VDC (Default), Wall Plate 304SS, ± 3% Accuracy, 1,000 Ohm RTD (Two Wires)

Product Configuration

Accuracy (Humidity) +/-3%
Sensor For Combination 1K-2W (1,000 Ω, 2 wires)

Product Family Specifications

Product Weight 0.235 lbs. (0.107 kg)
RH Sensor Type Capacitive with Hydrophobic Filter
Agency Approvals CE, RoHS, WEEE
RH Output Signal 3-wire: 0-5 or 0-10 VDC
RH Supply Voltage 0-5 VDC: 12 - 40 VDC / 18 - 28 VAC 0-10 VDC: 18 - 40 VDC / 18 - 28 VAC
Operating RH Range 0 to 95% RH, non-condensing (Conformally Coated PCB’s)
Product Dimensions 4.51” (114.56 mm) x 2.76” (70.10 mm) x 1.25” (31.75 mm)
Insulation | Rating Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E
RH NIST Test Points Default Test Points: 3 Points (20%, 50% \& 80%)
Wall Plate Material 430 Stainless Steel (Brushed Stainless Steel Finish)
RH Measurement Range 0-100%
Platinum RTD Stability +/-0.03% after 1000 Hours @ 572°F (300°C)
RH Response Time (T63) 20 Seconds Typical
RH Supply Current (VA) 8 mA maximum (0.32 VA)
Connections | Wire Size Screw Terminal Blocks (Polarity Sensitive) | 16 (1.31 mm²) to 26 AWG (0.129 mm²)
Temperature Coefficient 3850 ppm/ °C
Foam Flammability Rating FMVSS-302
Sintered Filter Material 304 Series Stainless Steel
Platinum RTD Din Standard DIN EN 60751 (IEC 751)
RH Output Load Resistance 4K Ohms Minimum
Storage Temperature Range -40 to 149°F (-40 to 65°C)
Operating Temperature Range -40 to 140°F (-40 to 60°C)
RH Accuracy @ 77°F (25°C) Model Dependent: +/- 2%, or 3% from 10 to 95%
Lead Length | Conductor Size 14” (35.6 cm) | 22 AWG (0.65 mm)
Platinum RTD Tolerance Class +/-0.06% Class A | Tolerance Formula: +/-°C \= (0.15°C + (0.002 * |t|)
Terminal Block Torque Rating 4.43 to 5.31 lb-in (0.5 to 0.6 Nm)
Foam Material | Foam Thickness Cross-linked LPDE (White) | 0.25” (6.35 mm)
RH Transmitter Stabilization Time 30 Minutes (Recommended time before doing accuracy verification)
Platinum RTD Output @ 32°F (0°C) RHx-100-xW-SP Series: 100 Ohms nominal | RHx-1K-xW-SP Series: 1000 Ohms nominal
RH Stability | Repeatability | Sensitivity Less than 2% drift / 5 years | 0.5% RH | 0.1% RH
Platinum RTD (PTC) | Number Wires (Wire Colors) RHx-100-2W Series: (Brown/Brown) \& RHx-2W-1K Series: (Black/Black) RHx-100-3W Series: (Brown/Brown/Black) \& RHx-3W-1K Series: (Black/Black/White)

Specifications

SKUCS6288043
MPNA/RH3-1K-2W-SP-010
Alternate Part #138368

You may also like