Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/100-2W-BP-20'CL2P

SKU: CS6288101MPN: A/100-2W-BP-20'CL2PAlternate Part #: 138610

100 Ohm (Two Wires) RTD, Bullet Probe, 1”, 20’ Plenum Cable

ACI A/0.1AN-BP-20'CL2P, A/0.1CP-BP-10'CL2P, A/1.8K-BP-10 CL2P, A/1.8K-BP-20'CL2P, A/1.8K-BP-6'CL2P, A/100-2W-BP-10'CL2P, A/100-2W-BP-20'CL2P, A/100-2W-BP-6'CL2P, A/100-3W-BP-10'-CL2P, A/100-3W-BP-20'-CL2P, A/100KS-BP-20'CL2P, A/100KS-BP-6'CL2P, A/10K-E1-BP-10'CL2P, A/10K-E1-BP-20'CL2P, A/10K-E1-BP-6'CL2P
Contact us for pricing and availability

Product Details

100 Ohm (Two Wires) RTD, Bullet Probe, 1”, 20’ Plenum Cable

Product Configuration

Wire 20’ Plenum Cable - CL2P
Sensor 100-2W (100 Ω, 2 wires)

Product Family Specifications

Number Wires A/100-2W-BP Series and A/1K-2W-BP Series: Two (Non-Polarity Sensitive) A/100-3W-BP Series and A/1K-3W-BP Series: Three (Polarity Sensitive)
Probe Material 304 Stainless Steel
Product Weight 0.02 lbs. (9.07g)
Agency Approvals CE, UKCA, RoHS, WEEE
Conductor Material Silver Plated Copper
Operating RH Range 10 to 95% RH, non-condensing
Product Dimensions 1.00” (25.4mm) x 0.250” (6.35mm)
Number Sensing Points One
Platinum RTD Stability +/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Platinum RTD Din Standard DIN EN 60751 (IEC 751) | 3850 ppm / ºC
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Sensor Type | Sensor Curve Platinum RTD | PTC (Positive Temperature Coefficient)
Operating Temperature Range -40 to 200ºC (-40 to 392ºF)
Lead Length | Conductor Size 24” (61cm) | 22 AWG (0.65mm)
Platinum RTD Tolerance Class +/- 0.06% Class A (Tolerance Formula: +/- ºC \= (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC) -40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF) | 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF) 200ºC (392ºF): +/- 0.55ºC (+/- 0.99ºF)
Sensor Output @ 0ºC (32ºF) A/100-xW-BP Series: 100 Ohms nominal | A/1K-xW-BP Series: 1000 Ohms nominal
Lead Wire Insulation | Wire Rating Etched Teflon Colored Leads | MIL-W-16878/4 (Type E)
Self-Heating | Maximum Operating Current 100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA 1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA
Platinum RTD Response Time (63% Step Change) 8 Seconds nominal

Specifications

SKUCS6288101
MPNA/100-2W-BP-20'CL2P
Alternate Part #138610

You may also like