ACI A/1K-NI-BP-10'CL2P
SKU: CS6286949MPN: A/1K-NI-BP-10'CL2PAlternate Part #: 130028
1,000 Ohm Nickel RTD, Bullet Probe, 1”, 10’ Plenum Cable

$46.12
UnitAvailable on backorder
Product Details
1,000 Ohm Nickel RTD, Bullet Probe, 1”, 10’ Plenum Cable
Product Configuration
| Wire | 10’ Plenum Cable - CL2P |
|---|
Product Family Specifications
| Number Wires | Two (Non-Polarity Sensitive) |
|---|---|
| Probe Material | 304 Stainless Steel |
| Product Weight | 0.02 lbs. (9.07g) |
| Agency Approvals | CE, RoHS, WEEE |
| Conductor Material | Silver Plated Copper |
| Product Dimensions | 1.00” (25.4mm) x 0.250” (6.35mm) |
| Nickel RTD Stability | +/- 0.05% after 1000 Hours @ 150ºC (302ºF) |
| Number Sensing Points | One |
| Nickel RTD Din Standard | Din 43760 | 6370 ppm/ºC |
| Operating Humidity Range | 10 to 95% RH, non-condensing |
| Storage Temperature Range | -40 to 85ºC (-40 to 185ºF) |
| Nickel RTD Sensor Accuracy | -40ºC (-40ºF): +/- 1.52ºC (+/- 2.73ºF) 0ºC (32ºF): +/- 0.4ºC (+/- 0.72ºF) 21.1ºC (70ºF): +/- 0.17ºC (+/- 0.34ºF)) 54.4ºC (130ºF): +/- 0.56ºC (1.00ºF) 121ºC (250ºF): +/- 1.25ºC (+/- 2.25ºF) |
| Sensor Type | Sensor Curve | Nickel RTD | PTC (Positive Temperature Coefficient) |
| Operating Temperature Range | -40 to 121ºC (-40 to 250ºF) |
| Lead Length | Conductor Size | 24” (61cm) | 22 AWG (0.65mm) |
| Response Time (63% Step Change) | 8 Seconds nominal |
| Lead Wire Insulation | Wire Rating | Etched Teflon Colored Leads | MIL-W-16878/4 (Type E) |
| Self-Heating | Maximum Operating Current | 0.3ºC/mW (Still Air) | 5 mA |
| Nickel RTD (PTC) Output @70°F (21.1°C) (Wire Colors) | 1000 Ohms nominal | Red/Red |
Specifications
| SKU | CS6286949 |
|---|---|
| MPN | A/1K-NI-BP-10'CL2P |
| Alternate Part # | 130028 |





