ACI A/BALCO-D-4"-GD

Name: ACI A/BALCO-D-4"-GD
Brand: ACI
SKU: CS6286497
Price: 36.99 USD
Availability: OutOfStock

SKU: CS6286497MPN: A/BALCO-D-4"-GDAlternate Part #: 123338

1,000 Ohm Balco RTD, Duct, 4”, Galvanized Enclosure

ACI A/0.1CP-D-12"-GD, A/0.1CP-D-4"-GD, A/0.1CP-D-4"-GD-NIST, A/0.1CP-D-8"-GD, A/0.1CP-D-8"-GD-NIST, A/1.8K-D-12"-GD, A/1.8K-D-18"-GD, A/1.8K-D-4"-GD, A/1.8K-D-6"-GD, A/1.8K-D-8"-GD, A/1.8K-D-8"-GD-NIST, A/1.8K-RA-18"-GD, A/1.8K-RA-24"-GD, A/1.8K-RA-36"-GD, A/100-2W-D-12"-GD

$36.99

Unit

Available on backorder

Quantity

remove

add

Product Details

1,000 Ohm Balco RTD, Duct, 4”, Galvanized Enclosure

Product Configuration

Length	4”
Enclosure	Galvanized

Product Family Specifications

Number Wires	Two (Non-Polarity Sensitive)
Probe Diameter	0.250” (6.35mm)
Agency Approvals	CE, RoHS2, WEEE
Lead Wire Colors	Orange/Yellow
Conductor Material	Silver Plated Copper
Balco RTD Stability	+/- 0.05% after 1000 Hours @ 150ºC (302ºF)
Number Sensing Points	One
Operating Humidity Range	10 to 95% RH, non-condensing
Storage Temperature Range	-40 to 85ºC (-40 to 185ºF)
Sensor Type \| Sensor Curve	Balco RTD \| PTC (Positive Temperature Coefficient)
Operating Temperature Range	-40 to 115ºC (-40 to 239ºF)
Lead Length \| Conductor Size	4”, 6” \& 8” Probes: 14” (35.6 cm) \| 12” \& 18” Probes: 24” (61cm) \| 22 AWG (0.65mm)
Response Time (63% Step Change)	8 Seconds nominal
Sensor Output @ 21.1ºC (70ºF)	Sensor Output @ 70ºF (21.1ºC)
Probe Material \| Flange Material	304 Stainless Steel \| Galvanized Steel
Lead Wire Insulation \| Wire Rating	Etched Teflon (PTFE) Colored Leads \| MIL-W-16878/4 (Type E)
Fitting Material \| Flammability Rating	Polyamide 66 (High Performance Nylon) \| UL94-HB
Foam Pad Material \| Flammability Rating	Neoprene/EPDM/SBR Polymer \| UL94-HBF; FMVSS-302; MIL-R-6130C
Balco RTD Sensor Accuracy 70°F (21.1°C)	+/- 1%
Balco RTD Temperature Coefficient (0-100°C)	4618 ppm/ºC
Enclosure Specifications (Material, Flammability, Temperature, NEMA/IP Rating)	“-GD” Enclosure: -40 to 115ºC (-40 to 239ºF); Galvanized Steel; NEMA 1 (IP10) “-PB” Enclosure: -30 to 90ºC (-22 to 194ºF); ABS Plastic; UL94-HB; Plenum Rated “-BB” Enclosure: -40 to 115ºC (-40 to 239ºF); Aluminum; NEMA 3R (IP 14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF); Polystyrene Plastic; UL94-V2; NEMA 4X (IP 66)