Schneider Electric SXWSC3PSELXX

Cover Plate for Sensor Base for SmartX IP Controllers Override Setpoint with Occupancy Sensor - Sensor Base not included

SmartX sensors are a family of living space sensors for use with SmartX IP controllers that use the EcoStruxure Building Operation software user interface. These sensors use an RJ-45 sensor bus that provides communication and power from the SmartX IP controller.SmartX living space sensors are modular and are ordered in two parts: the sensor base and the cover. Four SmartX communicating sensor base models are available that can be paired with any one of the modular SmartX covers.The SXWSC3PSELXX 3-button cover offers setpoint and override control with a passive infrared (PIR) motion detector to determine occupancy status. Setpoint and override parameters are configured using EcoStruxure Building Operation software. Status is provided via LED halo at the bottom of the sensor. It also uses a passive infrared (PIR) motion detector to determine occupancy status. The system may be configured using EcoStruxure Building Operation software to override comfort settings to occupied status when occupancy is detected during scheduled unoccupied periods. The occupancy sensor uses a passive infrared (PIR) motion detector to determine occupancy status. The system may be configured in EcoStruxure Building Operation software to override comfort settings to occupied status when occupancy is detected during scheduled unoccupied periods.