Square D ATV930U55N4
SKU: CS3675079MPN: ATV930U55N4
variable speed drive, Altivar Process ATV900, ATV930, 5.5kW, 400 to 480V, with braking unit, IP21

$2,515.43
UnitAvailable on backorder
Product Details
Altivar 930 Variable Speed Drive:
- Motor Power kW: 5.5 kW for Normal Duty* Motor Power HP: 7.5 HP for normal duty, 5 HP for heavy duty* Rated Supply Voltage: 380-480V* Network Number of Phases: 3 Phases
Attributes
| 4 Quadrant Operation Possible | 1.0000 |
| Acceleration And Deceleration Ramps | linear adjustable separately from 0.01…9999 s |
| Ambient Air Temperature For Storage | -40-70 °C |
| Ambient Air Transport Temperature | -40-70 °C |
| Analogue Input Number | 3.0000 |
| Analogue Output Number | 2.0000 |
| Assembly Style | enclosed |
| Asynchronous Motor Control Profile | optimized torque mode# #variable torque standard# #constant torque standard |
| Base Load Current At High Overload | 9.3 A |
| Base Load Current At Low Overload | 12.7 A |
| Brake Chopper Integrated | 1.0000 |
| Braking To Standstill | by DC injection |
| Communication Port Protocol | EtherNet/IP# #Modbus TCP# #Modbus serial |
| Connector Type | 2 RJ45# #1 RJ45 |
| Data Format | 8 bits, configurable odd, even or no parity |
| Device Application | industrial application |
| Discrete Input Logic | 16 preset speeds |
| Discrete Input Number | 10.0 |
| Discrete Output Number | 2.0000 |
| Emc Filter | integrated# #with EMC plate option |
| Environmental Class During Operation | class 3C3 according to IEC 60721-3-3# #class 3S3 according to IEC 60721-3-3 |
| Isolation | between power and control terminals |
| Marking | CE |
| Maximum Acceleration Under Shock Impact During Operation | 150 m/s² at 11 ms |
| Maximum Acceleration Under Vibrational Stress During Operation | 10 m/s² at 13…200 Hz |
| Maximum Deflection Under Vibratory Load During Operation | 1.5 mm at 2…13 Hz |
| Maximum Output Frequency | 599 Hz |
| Maximum Output Voltage | 480.0 V |
| Motor Slip Compensation | adjustable# #can be suppressed# #not available in permanent magnet motor law# #automatic whatever the load |
| Mounting Mode | wall mount |
| Network Frequency | 50…60 Hz |
| Noise Level | 54.5 dB |
| Nominal Switching Frequency | 4 kHz |
| Number Of Addresses | 1-247 |
| Operating Position | vertical ± 10 degree |
| Overvoltage Category | III |
| Permitted Relative Humidity During Operation | class 3K5 according to EN 60721-3 |
| Physical Interface | Ethernet# #2-wire RS 485 |
| Pollution Degree | 2.0 |
| Product Certifications | TÜV# #CSA# #UL |
| Product Destination | asynchronous motors# #synchronous motors |
| Product Or Component Type | variable speed drive |
| Product Specific Application | process for industrial |
| Prospective Line Isc | 50 kA |
| Quantity Per Set | 1 |
| Range Of Product | Altivar Process ATV900 |
| Regulation Loop | adjustable PID regulator |
| Relative Symmetric Network Frequency Tolerance | 0.050000000745058 |
| Relay Output Number | 3.0000 |
| Standards | UL 508C# #EN/IEC 61800-3# #EN/IEC 61800-5-1# #IEC 61000-3-12# #IEC 60721-3# #IEC 61508# #IEC 13849-1 |
| Synchronous Motor Control Profile | permanent magnet motor# #synchronous reluctance motor |
| Transmission Frame | RTU |
| Transmission Rate | 10, 100 Mbits# #4.8 kbps# #9600 bit/s# #19200 bit/s |
| Type Of Polarization | no impedance |
| Variant | standard version# #with braking chopper |
| Volume Of Cooling Air | 38 m3/h |
| With Safety Function Safe Brake Management Sbc Sbt | 1.0000 |
| With Safety Function Safe Direction Sdi | 0.0000 |
| With Safety Function Safe Operating Stop Sos | 0.0000 |
| With Safety Function Safe Position Sp | 0.0000 |
| With Safety Function Safe Programmable Logic | 0.0000 |
| With Safety Function Safe Speed Monitor Ssm | 0.0000 |
| With Safety Function Safe Stop 1 Ss1 | 1.0000 |
| With Safety Function Safe Torque Off Sto | 1.0000 |
| With Safety Function Safely Limited Position Slp | 0.0000 |
| With Safety Function Safely Limited Speed Sls | 1.0000 |
| With Sft Fct Safe Stop 2 Ss2 | 0.0000 |
Specifications
| SKU | CS3675079 |
|---|---|
| MPN | ATV930U55N4 |










