Sensor Accessories

Pocket Wrench With 5/64” Allen Wrench For Branch Test Port on Pneumatic Thermostats and Locking Cover Screws and 0.048” 6-spline Wrench

Snap-in “labor-saving” fitting for mounting 2 x 2 in. thermostats, humidistats, and transmitters on drywall having at least 3-½ in. studs.

Receiver Controller, Universal Replacement Single or Dual Input With Remote Set Point Adjustment, Cover Included

AA1 Series bypass valve assembly

AA Series duct static pickup probe, 8”, dry pressure

1/16 in. and ¼ in. hex head thermostat calibration and coverscrew wrench. (Also adjusts 2341 Series Receiver-Controllers.)

Wire Guard With Steel Base Plate, 4-¼”H x 1-⅝”W x 1-⅝”D

Receiver-Controller, Reverse-Acting, pre-mounted on base for field use

Gray cover with Barber-Colman logo dial

Pilot Restrictor Kit (All Relay Type Except -600)

1.0 scfh In-Line Restrictor.

Sub-Base, Single Thermostat Selector Switch, One DP4T, One DPDT, For Use With All Single Electric Room Thermostats Except TC-114 and TA-121

Gasket for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Restrictor for copper fitting

Wire Guard With Steel Base Plate, 6-½”H x 6-⅝”W x 3-¼”D

Adaptor Kit

Factory Authorized Parts™ - HH79HZ004 - THERMISTOR ASSEMBLY

Replacement Humidity Element for Veris Sensors, 2% Accuracy

Paralleling Relay: Solid Start, Actuator or Panel Mount

Sensing Cable, 25 ft

AA Series room static pressure pickup

Thermostat conversion kit, white.

RH SENSOR 5% REPLACE ELEMENT

CALIBRATION KIT for Veris CO2 Sensors

Replacement Humidity Element, 1% Accuracy, NIST

RH SENSOR 2% REPLACE ELEMENT

AA Series duct static pickup probe, 4”, dry pressure

AGxE Series Rugged Metal Wall Mount Enclosure

Static Pressure Pickup Port: Wall mounted, Stainless steel wall plate with sinter vent, For use with Veris Px series sensors

TAC Pneumodular tubing - 100 Ft. Roll

Receiver-Controller, Reverse-Acting

LINKAGE KIT

Squeeze Bulb Pump With Valve For Testing pneumatic Controls And Actuators.

Electrical Contact Assembly for TAC Pneumodular Control System

Setpoint Knob Kit Fahrenheit,TK-1001 thru TK-1601

Air Velocity Averaging Pitot Tube 6 in

Air Velocity Averaging Pitot Tube 12 in

Air Velocity Averaging Pitot Tube 8 in

Air Velocity Averaging Pitot Tube 10 in

Air Velocity Averaging Pitot Tube 14 in

Pneumatic Capacitor

Packing Wrench For VB-121, VB-131, VB-151, VB-314, VB-324, VB-334, VB-354 Valves

Gauge tap adaptor for T15 or T16 only. One end accepts ⅛ in. MPT gauge, other end screws into thermostat body.

Tee Restrictor, .0075”, For ¼” Plastic Tubing

1.0 scfh Restrictor Tee for Use with One-Pipe Thermostats or Transmitters (¼ in. polythylene or polyurethane tubing). Color: red.

BULB ASSEMBLY

Gaskets Quantity Package (25) for TAC Pneumodular Control System

Base For Field Mounting Pneumodular Receiver-Controller, Plus Two 2” Receiver Gauges and Two 1-½” Pressure Gauges, Direct Acting

Aluminum Bulb Shield, Outdoor, 2”H x 11-¾”W x 1-⅛”D

Gray cover with Barber-Colman logo dial

Conversion Kit, Pneumatic, Wall Thermostat Mounting

Socket Assembly, Includes 1 MCS-PS, 1 MCS-G, 4 MCS-SCREW, 15 MCS-PLUG

Spring: 3-8 MK-7100-0-0-1

Gray cover with Barber-Colman logo dial

Tubing Connectors Quantity Package (50) for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial

Socket Assembly (includes one 22-130) for TAC Pneumodular Control System

Gray cover with Barber-Colman logo dial