Sensors

-40°/65°C Thermistor; 12” Leads

6900507 - HF

Inductive sensor

WELL TEMP SEN 6”10K; WELL INSERTION TEMPERATURE SENSOR 10K OHM THERMISTOR 6 IN. PROBE

TR40 WALL MODULE, TEMP, SYLK

36 in. Thermocouple

24 in. Thermocouple

10K TYPE II WATER TEMP SENSOR,

Flush Mount Temperature Sensor, Metal, For Use with TEC Only

Eaton E51 NEMA limit switch inductive proximity sensor reflector

80X80 NETWORK WALLPLATE; PLATE FOR MOUNTING A 80X80 NETWORK SENSOR ON A 2X4 WALLBOX IN EITHER VERT

TEMP SENSOR; 1000 OHM; PT; FOR WALL MTG.

WELL TEMP SEN 6” 2.25K; WELL INSERTION TEMPERATURE SENSOR 2.252K OHM THERMISTOR 6 IN. PROBE

Thermocouple DIN Rail Terminal Blocks, Narrow 10.7 mm Width

Duct/Immersion sensor Temperature passive, NTC20k, Probe length 6” [150 mm], Probe diameter 0.24” [6 mm]

Duct Point Temp Sensor, 1k Ohm (385a), Pt RTD, 18 Inch Rigid Probe

WELL TEMP SEN 6” 1K NI; WELL INSERTION TEMPERATURE SENSOR;1K OHM NICKEL 6 IN. PROBE

TEMP SENSOR; 1000 OHM; NI; FOR WALL MTG.

20K TEMP WALL MODULE

AIR GAUGE”0-30#/0-200KPA

AIR GAGE 1-½”

20K WATER TEMP SENSOR, 5 IN.INSERTION

6-WIRE 2-RJ11 RS CABLE 50’PLMN

Room Temperature Sensor, 1k Ohm (385a) Pt RTD

PTC SILICON SENSOR; WITH PVC CABLE LENGTH 6 ½ FT (2M) SENSOR RANGE -40 TO 212 DEGREES F

6900506 - HF

Bolt-On Thermocouple with SS Washer Housing

Standard Size Thermocouple Connectors

-45/65°C Watertight Thermister

Needle Probe, Prod Grp 19X, 0-30 psig, Calibration Cvr Wrench, 1-½” Dia Gauge

Current Sensor: 4-20mA Analog Output, 0-30/60/120A field selectable Amp Range, Split-Core Housing, UL Listed for use on 75 deg. C insulated conductors

SENSOR; 1000 OHM +/- 1%; STRAP ON APPL.

Duct Point Temp Sensor, 100k Ohm Thermistor, 18 Inch Rigid Probe

DUCT PROBE SENSOR 8 INCH; 1000 OHM NICKEL - METAL ENCLOSURE

Cable Temperature Sensor with mounting flange passive, NTC10k (10k2), Probe length 8” [200 mm], Probe diameter 0.24” [6 mm], cable 2 m, 2-wire

Contact temperature sensor passive, Ni1000 (JCI)

Duct/Immersion sensor Temperature passive, NTC10k3 (Precon), Probe length 8” [200 mm], Probe diameter 0.24” [6 mm]

ET Series temperature sensor, 8”, averaging, steel enclosure, 10k ohm thermistor with 11k ohm Shunt, I/A compatible

TEMP SENSOR; 1000 OHM; NI; 3”; FOR OUTDOOR AIR MTG.

TE-631AM-1; WELL; 1000 OHM NICKEL WELL INSERTION 6 INCH PROBE

Veris TW2 Series Temperature Sensor, Wall, 10K Type 3 Thermistor

Duct Poiint Temperature Sensor, 10k Ohm Type 2 Thermistor, 4 Inch Probe

TE-636GV-2 10K; DUCT PROBE TEMP SENSOR 10K THERMISTOR SENSOR 4IN PROBE

DUCT PROBE TEMP. SEN. 1K; DUCT PROBE TEMP SENSOR 1K NICKEL SENSOR 4IN PROBE

Reflector

ET Series Temperature Sensor, Room, 10k Ohm T3 Thermistor, Continuum Compatible

20K DUCT TEMP SENSOR, 6 IN.

Cable Clamp Standard Size Thermocouple Connectors

ET Series temperature sensor, 4”, duct, 10k type III thermistor, plastic box

Duct Poiint Temperature Sensor, 10k Ohm Type 2 Thermistor, 8 Inch Probe

Retractable Cable, 2 wire, Thermocouples, RTDs, Thermistors

Bolt-On Thermocouple with SS Washer Housing

Room Temp Sensor: 1.8K Ohm Thermistor for Vista Compatibility, RJ11 Communication Jack, SE Logo

10K Ohm Wired Zone Sensor

Duct/Immersion sensor Temperature passive, NTC10k (10k2), Probe length 6” [150 mm], Probe diameter 0.24” [6 mm]

Self-Adhesive Polyimide Fast Response Surface Thermocouples - High Temp

Factory Authorized Parts™ - HK02YB097 Switch

Factory Authorized Parts™ - 50HJ401431 Sensor

Current Switch w/Relay: Fixed Trip Point, 1.5-200 Amp, N.O. 1.0A@30VAC/DC, 1.5A or less Fixed Trip Point, SPST, N.O. Relay, 24VAC/DC Relay Coil

A-303 PORTABLE STATIC