Amplifiers

STD RECT. AMP 3.0/2.0S; LLW; C7012A/C

STD RECT. AMP 3.0/2.0S

STD UV AMP 3.0/2.0S; C7027

STD UV AMP 0.8/1.0S; C7027

STD RECT. AMP 0.8/1.0S

A-CHK UV AMP 0.8/1.0S; C7027; NO CE

S-CHK UV AMP 3.0/2.0S; C7061

S-CHK RECT. AMP 3.0/2.0S; C7012E/F

Flame rect amp. 3 sec FFRT. Use with 69ND, 45CM.

UV amp, 3 sec FFRT. Use with UV1, UV2, 45UV3.

S-CHK UV AMP 0.8/1.0S; C7061

Flame rect amp. 2-4 sec FFRT. Use with 69ND, 45CM.

2 OR 3 SEC FLAME FAILURE RESPONSE TIME. FOR USE W/C7012A,C.

A-CHK RECT. AMP 3.0/2.0S

Ultraviolet amplifier, use with UV1, UV2, UV8, UV90, or 45UV3.

UV Self Check A 3 sec. FFRT

UV amp, 2-4 sec FFRT. Use with UV1, UV2, 45UV3.

Expansion module - use with E100/E110/E201/E211

Ultraviolet self check amplifier. Use with 45UV5-1005, -1007, -1008, -1009, or 55UV5-1007, -1009.

A-CHK IR AMP 3.0/2.0S; C7915

Infrared autocheck amplifier, use with 48PT2.

Chassis, 120 VAC, 50/60 Hz with UV non self-check amplifier. UL, FM, CE Approved.

STD IR AMP 3.0/2.0S; C7915

A-CHK RECT. AMP 0.8/1.0S

STD UV AMP 2.0/3.0S; C7027

UV amp, .8 sec FFRT. Use with UV1, UV2, 45UV3.

Ultraviolet self-check amplifier, 2-4 sec FFRT, use with 45UV5-1007, -1008, -1009.

Flame Amplifier, Infrared used w/ 7800 Series Relay Modules (FFRT 2.0 sec or 3.0 sec)

STD RECT. AMP 0.8/1.0S; LLW

Flame A. Module

Infrared amp, 3 sec FFRT. Use with 48PT2 scanner.

Fiber Amp PNP 2M pre-wired

Amplifier, for use with EP178 / EP378 and one or two 85UVF4-1QDWR, 85IRF4-1QDWR, or InSight flame scanners (with 59-497-020WR cable).

Chassis, 120 VAC, 50/60 Hz with IR Auto-Check amplifier. UL, FM, CE Approved.

UV amp, 0.8 sec FFRT. Use with UV1, UV2, 45UV3.

S-CHK SSUV AMP 3.0/2.0S; C7961

Infrared autocheck amplifier, use with 48PT2. Special application only, consult factory.

GLL170T-B432 FIBER AMPLIFIER

AMP,RAIL MT,ALARM OUTPUT

Flame amplifier, 120 VAC, high discrimination. Consists of 60-2204-2, 60-2207-2, and 60-2301.