Belimo All Products

4” 2-Way Stainless Steel DI Butterfly Valve Assembly

CCV/PICCV valve neck extension kit

Damper clip for damper blade, 3.5” width.

Resistor, to convert a 4...20 mA signal into a 2...10 V control signal

Shaft clamp reversible, for central mounting, for damper shafts Ø12.7 / 19.0 / 25.4 mm

Shaft extension for ½” diameter shafts (3.8” L).

Ball joint suitable for damper crank arm KH8

Ball joint suitable for damper crank arm KH8

Damper clip for damper blade, 6” width.

Thermoelectric tripping device with control key, Duct inside temperature 72 deg. C (color black), Duct outside temperature 72 deg. C, Probe length…

Shaft extension for ⅜” diameter shafts (4” L).

Ball joint suitable for damper crank arm KH8 / KH10

Mounting kit for linkage operation for flat installation

Mounting Bracket: GM,AM,SM

Push rod for KG6 \& KG8 ball joints (36” L, 5/16” diameter).

Shaft extension for ½” diameter shafts (5” L).

Push rod for KG10A ball joint (36” L, ⅜” diameter).

CCV/PICCV valve neck extension kit

Damper crank arm Slot width 8.2 mm, for Ø1.05”

AFB/NFB mounting brackets

TFB(X) crankarm adaptor kit (includes ZG-113).

Anti-rotation bracket TF/NKQ/AM/NM/LM.

LF crankarm adaptor kit (includes ZG-112).

Shaft clamp reversible, clamping range Ø16...20 mm

Shaft clamp reversible, clamping range Ø12...26.7 mm

Actuator arm, clamping range Ø8...16 mm, Slot width 8.2 mm

LF crankarm adaptor kit (T bracket included).

Auxiliary switch, for ½” diameter shafts mount

TFB(X) Mounting Hardware without bracket

Shaft extension 240 mm Ø20 mm for damper shaft Ø 8...22.7 mm

Connection cable 16 ft [5 m], A: RJ11 6/4 ZTH EU, B: 6-pin for connection to service socket

Retrofit clip, for NF..A / SF..A

Connection cable 16 ft [5 m], A: RJ11 6/4 ZTH EU, B: free wire end for connection to MP/PP terminal

Weather shield for B2, B3 CCV, with LF

Standard GK/GM clamp (½” to 1.05”).

LF right angle bracket 4-½x5-½x2-½” (HxWxD).

Anti-rotation bracket LF.

Damper crank arm Slot width 8.2 mm, clamping range Ø10...18 mm

Repack Kit for Belimo G6, G7 series globe valves, Stainless steel trim

LF Trane Voyager retrofit kit (incl. bracket and hardware).

Dual actuator mounting bracket.

Positioner for wall mounting

Shaft extension for ½” diameter shafts (3” L).

Shaft extension 170 mm Ø10 mm for damper shaft Ø 6...16 mm

Damper crank arm, Slot width 6.2 mm

Anti-rotation bracket, for AF / NF

Position indicatorFor CM.., Multipack 20 pcs.

Anti-rotation clipFor CM.., for UM.., Multipack 20 pcs.

Wrench 13 mm

Retrofit valve linkage, for HD/HDU series butterfly valve 2-way 65...150 with PR, PKR

Retrofit valve linkageFor L series butterfly valve, 2-way, 8...12” [200...300], with PR, PKR

ACT/NSR/27IN-LB(3NM)/24VAC24VDC-+/ON/OFF

Linkage kit for B2, B3 CCV with LF Multipack 12 pcs.

PVC Weathershield for VS/VB ball valves with Dual GM, AF, GK Actuators

PVC Weathershield for ball valves with AF.. Series actuators

Temperature sensor fitting for Belimo Energy Valve 1 ¼” 32, threaded pipe body

PVC W’Shld for F6/F7 for AF.. Series

PVC W’Shld for F6/F7 for AF.. Series

Convert Pulse Width Modulated Signal to a 2...10 V Signal for Belimo Proportional Actuators

Temperature sensor fitting for Belimo Energy Valve 1” 25, threaded pipe body