ACI A/100-2W-D-6"-GD

Name: ACI A/100-2W-D-6"-GD
Brand: ACI
SKU: CS6289534
Price: 30.59 USD
Availability: OutOfStock

SKU: CS6289534MPN: A/100-2W-D-6"-GDAlternate Part #: 146195

100 Ohm (Two Wires) RTD, Duct, 6”, Galvanized Enclosure

ACI A/0.1CP-D-12"-GD, A/0.1CP-D-4"-GD, A/0.1CP-D-4"-GD-NIST, A/0.1CP-D-8"-GD, A/0.1CP-D-8"-GD-NIST, A/1.8K-D-12"-GD, A/1.8K-D-18"-GD, A/1.8K-D-4"-GD, A/1.8K-D-6"-GD, A/1.8K-D-8"-GD, A/1.8K-D-8"-GD-NIST, A/1.8K-RA-18"-GD, A/1.8K-RA-24"-GD, A/1.8K-RA-36"-GD, A/100-2W-D-12"-GD

$30.59

Unit

Available on backorder

Quantity

remove

add

Product Details

100 Ohm (Two Wires) RTD, Duct, 6”, Galvanized Enclosure

Product Configuration

Length	6”
Sensor	100-2W (100 Ω, 2 wires)
Enclosure	Galvanized
Temperature Series	Platinum RTD (1K \& 100 ohm)

Product Family Specifications

Stability	+/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Sensor Type	Platinum RTD
Number Wires	A/100-2W-D Series and A/1K-2W-D Series: Two (Non-Polarity Sensitive) A/100-3W-D Series and A/1K-3W-D Series: Three (Polarity Sensitive)
Sensor Curve	PTC (Positive Temperature Coecient)
Probe Diameter	0.250” (6.35mm)
Probe Material	304 Stainless Steel
Sensor Accuracy	-40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF) 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF) 115ºC (239ºF): +/- 0.38ºC (+/- 0.69ºF)
Agency Approvals	CE, RoHS2, WEEE
Conductor Material	Silver Plated Copper
Number Sensing Points	One
Operating Humidity Range	10 to 95% RH, non-condensing
Storage Temperature Range	-40 to 85ºC (-40 to 185ºF)
Operating Temperature Range	Sensor : -40 to 392ºF (-40 to 200ºC)
Enclosure Temperature Rating	“-GD” Enclosure: -40 to 115ºC (-40 to 239ºF), Galvanized Steel, NEMA 1 (IP10) “-PB” Enclosure: -30 to 100ºC (-22 to 212ºF), ABS Plastic, UL94-5VB, Plenum Rated “-BB” Enclosure: -40 to 115ºC (-40 to 239ºF), Aluminum, NEMA 3R (IP14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF), Polystyrene Plastic, NEMA 4X (IP66)
Lead Length \| Conductor Size	4”, 6” \& 8” Sensors: 14” (35.6cm) \| 22 AWG (0.65mm) 12” or 18” Sensors: 24” (61cm) \| 22 AWG (0.65mm)
Sensor Output @ 0ºC (32ºF)	A/100-xW-D Series: 100 Ohms nominal A/1K-xW-D Series: 1000 Ohms nominal +/- 0.06% Class A (Tolerance Formula: +/- ºC \= (0.15ºC + (0.002 * \|t\|)) where \|t\| is the absolute value of Temperature above or below 0ºC in ºC)
Response Time (63% Step Change)	8 Seconds nominal
Lead Wire Insulation \| Wire Rating	Etched Teflon (PTFE) Colored Leads \| Mil Spec 16878/4 Type E)
Din Standard \| Temperature Coeffcient	DIN EN 60751 (IEC 751) \| 3850 ppm / ºC
Fitting Material \| Flammability Rating	Polyamide 66 (High Performance Nylon) \| UL94-HB
Foam Pad Material \| Flammability Rating	Neoprene/EPDM/SBR Polymer \| UL94-HBF; FMVSS-302; MIL-R-6130C
Self-Heating \| Maximum Operating Current	100 Ohm RTD: 7 mW/ºC (Still Air) \| 5 mA 1K Ohm RTD: 4 mW/ºC (Still Air) \| 3 mA