Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/100KS-D-12"-PB-NIST

SKU: CS6289523MPN: A/100KS-D-12"-PB-NISTAlternate Part #: 146151

100,000 Ohm Thermistor, Duct, 12”, Plastic Enclosure, NIST Cert

ACI A/0.1AN-D-12"-PB, A/0.1AN-D-12"-PB-NIST, A/0.1AN-D-6"-PB, A/0.1AN-D-6"-PB-NIST, A/0.1AN-D-8"-PB, A/0.1CP-D-18"-PB, A/0.1CP-D-4"-PB, A/0.1CP-D-8"-PB, A/1.8K-D-12"-PB, A/1.8K-D-18"-PB, A/1.8K-D-4"-PB, A/1.8K-D-6"-PB, A/1.8K-D-8"-PB, A/1.8K-RA-18"-PB, A/1.8K-RA-24"-PB
Contact us for pricing and availability

Product Details

100,000 Ohm Thermistor, Duct, 12”, Plastic Enclosure, NIST Cert

Product Configuration

NIST 3 Point NIST
Length 12”
Sensor 100KS (100,000 Ω)
Enclosure Plastic
Temperature Series Thermistor

Product Family Specifications

Stability Sensor Dependent; Contact ACI for more information on specific sensor
Sensor Type Thermistor
Number Wires Two (Non-Polarity Sensitive)
Sensor Curve Non-Linear, NTC (Negative Temperature Coecient)
Probe Diameter 0.250” (6.35mm)
Probe Material 304 Stainless Steel
Sensor Accuracy +/-0.2ºC (+/-0.36ºF) A/10K-E1 Series: +/-0.3ºC (+/-0.54ºF) A/1.8K Series: +/- 0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)
Agency Approvals CE, UKCA, RoHS2, WEEE
Conductor Material Silver Plated Copper
Number Sensing Points One
Operating Humidity Range 10 to 95% RH, non-condensing
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Power Dissipation Constant 3 mW/ºC A/1.8K Series: 1 mW/ºC A/10K-E1 Series: 2 mW/ºC
Operating Temperature Range -40ºC (-40ºF) to 150ºC (302ºF)
Enclosure Temperature Rating “-GD” Enclosure: -40 to 115ºC (-40 to 239ºF), Galvanized Steel, NEMA 1 (IP10) “-PB” Enclosure: -30 to 100ºC (-22 to 212ºF), ABS Plastic, UL94-5VB, Plenum Rated “-BB” Enclosure: -40 to 115ºC (-40 to 239ºF), Aluminum, NEMA 3R (IP14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF), Polystyrene Plastic, NEMA 4X (IP66)
Lead Length | Conductor Size 4”, 6” and 8” Probes: 14” (35.6 cm) | 22 AWG (0.65 mm) 12” and 18” Probes: 24” (61 cm) | 22 AWG (0.65 mm)
Response Time (63% Step Change) 10 Seconds nominal
Lead Wire Insulation | Wire Rating Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Fitting Material | Flammability Rating Polyamide 66 (High Performance Nylon) | UL94-HB
Foam Pad Material | Flammability Rating Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C

Specifications

SKUCS6289523
MPNA/100KS-D-12"-PB-NIST
Alternate Part #146151

You may also like