Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/AN-INW-2.5"-EXPL

SKU: CS6288459MPN: A/AN-INW-2.5"-EXPLAlternate Part #: 140975

10,000 Ohm Thermistor (Type III), Hazardous, Immersion, No Well, 2.5”

ACI A/1.8K-INW-4"-EXPL, A/100-2W-INW-4"-EXPL, A/1K-2W-INW-4"-EXPL, A/1K-2W-INW-6"-EXPL-NIST, A/20K-INW-4"-EXPL, A/3K-INW-2.5"-EXPL, A/AN-INW-2.5"-EXPL, A/AN-INW-4"-EXPL, A/CP-INW-2.5"-EXPL, A/CP-INW-4"-EXPL, A/TT100-INW-4"-4-EXPL, A/TT1K-INW-2.5"-4-EXPL, A/TT1K-INW-4"-4-EXPL, A/TTM1K-INW-12"-4-EXPL, A/TTM1K-INW-6"-4-EXPL
Contact us for pricing and availability

Product Details

10,000 Ohm Thermistor (Type III), Hazardous, Immersion, No Well, 2.5”

Product Configuration

Length 2.5”
Sensor AN (10K Ω, Type III)
Configuration Immersion
Thermowell Type No Well

Product Family Specifications

Number Wires Two (Non-Polarity Sensitive)
Probe Diameter 0.250” (6.35mm)
Probe Material 304 Stainless Steel
Product Weight Room: 1.8 lbs, Duct: 4.4 lbs, Immersion: 4.75 lbs
Sensor Threads ½” NPT (National Pipe Tapered) Thread
Sensor Accuracy A/CP-HT: +/- 1%
Agency Approvals CE, RoHS2, WEEE
Conductor Material Silver Plated Copper
Number Sensing Points One
Operating Humidity Range 10 to 95% RH, non-condensing
Enclosure Hubs | Hub Size Two | ½” NPT Female Hubs
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Power Dissipation Constant 3 mW/ºC except A/1.8K Series: 1 mW/ºC | A/10K-E1 and A/CP-HT Series: 2 mW/ºC
Sensor Type | Sensor Curve Thermistor | Non-Linear, NTC (Negative Temperature Coefficient)
Accuracy 0-70ºC (32-158ºF) +/-0.2ºC (+/-0.36ºF) except A/10K-E1 Series: +/- 0.3ºC (+/-0.54ºF) A/1.8K Series: +/-0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)
Enclosure UL | CSA Standards UL 1203 | CSA C22.2 No. 30
Lead Length | Conductor Size 14” (35.6 cm) or 24” (61 cm) | 22 AWG (0.65mm)
Sensor Output @ 25ºC (77ºF) A/AN (Type III): 10KΩ nominal | White/White A/CP (Type II): 10KΩ nominal | White/Green A/CP-HT (Type II): 10KΩ nominal | White/Green A/10K-E1: 10KΩ nominal | Gray/Orange A/1.8K: 1.8KΩ nominal | Red/Yellow A/3K: 3KΩ nominal | White/Brown A/20K: 20KΩ nominal | Brown/Blue
Response Time (63% Step Change) 10 Seconds nominal
Enclosure Explosion Proof Rating CL. I, Div. 1 \& 2, Groups A, B, C, D
Lead Wire Insulation | Wire Rating Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Sensing Temperature Operating Range -40 to 150ºC (-40 to 302ºF) | A/CP-HT: -40 to 200ºC (-40 to 392ºF)
Thermowell Material | Bore Diameter 304 Stainless Steel | 0.260”
Enclosure Dust-Ignition Proof Rating CL. II, Div. 1, Groups E, F, G
Enclosure Raintight | Wet Locations Ratings CL. II, Div. 2, Groups F, G | CL. III
Thermowell Instrument Thread | Process Thread ½” NPS (National Pipe Straight) Female Thread | ½” NPT (National Pipe Tapered) Male Thread
Enclosure Specifications (Material, Operating Temperature, NEMA Ratings) “-D” Enclosure: Feraloy® Iron Alloy, -50 to 60ºC (-58 to 140ºF), NEMA 3, 4, 7ABCD, 9EFG “-I or -INW” Enclosure: Feraloy® Iron Alloy, -50 to 60ºC (-58 to 140ºF), NEMA 3, 4, 7ABCD, 9EFG “-R” Enclosure: Copper-Free Aluminum, -50 to 60ºC (-58 to 140ºF), NEMA 3, 4, 7ABCD, 9EFG

Specifications

SKUCS6288459
MPNA/AN-INW-2.5"-EXPL
Alternate Part #140975

You may also like