ACI A/TTM100-INW-2.5"-4-BB-POTTED

Name: ACI A/TTM100-INW-2.5"-4-BB-POTTED
Brand: ACI
SKU: CS6288415
Availability: OutOfStock

SKU: CS6288415MPN: A/TTM100-INW-2.5"-4-BB-POTTEDAlternate Part #: 140775

Transmitter w/ 100 Ohm RTD (NIST Cert), Immersion, No Well, 2.5”, NEMA 3R Enclosure, 4-20mA Output, Potted Board

ACI A/0.1AN-INW-4"-BB, A/0.1CP-INW-2.5"-BB, A/0.1CP-INW-4 -BB, A/0.1CP-INW-4"-BB-NIST, A/0.1CP-INW-6"-BB, A/1.8K-D-12"-BB, A/1.8K-D-4"-BB, A/1.8K-INW-12"-BB, A/1.8K-INW-2.5"-BB, A/1.8K-INW-4"-BB, A/1.8K-INW-6"-BB, A/1.8K-RA-24"-BB, A/100-2W-D-12"-BB, A/100-2W-D-6"-BB, A/100-2W-INW-2.5"-BB

Product Details

Transmitter w/ 100 Ohm RTD (NIST Cert), Immersion, No Well, 2.5”, NEMA 3R Enclosure, 4-20mA Output, Potted Board

Product Configuration

Length	2.5”
Sensor	TTM100 (XMTR, 100 Ω, NIST)
Enclosure	Aluminum, NEMA 3R
Thermowell Type	No Well
Board Enhancement	Potted Board

Product Family Specifications

Accuracy	(Tolerance Formula: +/- °C \= (0.15°C + (0.002 * \|t\|)) where \|t\| is the absolute value of temperature above or below 0°C
Stability	+/- 0.03% after 1000 Hours @ 300°C (572°F)
Sensor Type	Platinum RTD
Number Wires	Two
Sensor Curve	PTC (Positive Temperature Coefficient)
Output Signals	Current: 4-20 mA (2-Wire Loop Powered) Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
Probe Diameter	0.250” (6.35 mm)
Lead Wire Colors	A/TT100/TTM100 Series: Brown/Brown \| A/TT1K/TTM1K Series: Black/Black
Temperature Drift	Temp. Spans \< 100°F (38°C): +/- 0.04% \| Temp. Spans > 100°F (38°C): +/- 0.02%
Number Sensing Points	One
Connections \| Wire Size	Screw Terminal Blocks (Polarity Sensitive) \| 16 AWG (1.31 mm2) to 26 AWG (0.129 mm2)
Operating Humidity Range	10 to 90% RH, non-condensing
Storage Temperature Range	-40 to 85°C (-40 to 185°F)
TT Maximum Load Resistance	(Terminal Voltage - 8.5 V) \| 0.020 A
Operating Temperature Range	-40 to 185°F (-40 to 85°C)
Calibrated Temperature Spans	Minimum Temp. Span: 50°F (28°C) \| Maximum Temp. Span: 500F (260°C)
Platinum RTD Tolerance Class	+/- 0.06% Class A
Sensor Output @ 0ºC (32ºF)	A/TT100/TTM100 Series: 100 Ohms nominal \| A/TT1K/TTM1K Series: 1000 Ohms nominal
Terminal Block Torque Rating	0.37 ft-lb (0.5 Nm) nominal
Warm Up Time \| Warm Up Drift	10 Minutes \| +/- 0.1%
Response Time (63% Step Change)	8 Seconds nominal
Sensor Operating Temperature Range	-40 to 200ºC (-40 to 392ºF)
TT Calibrated Accuracy \| Linearity	Temp. Spans \< 500°F (260°C): +/- 0.2% \| Temp. Spans > 500°F (260°C): +/- 0.5%
Thermowell Material \| Bore Diameter	0.260” (6.60mm)
Din Standard \| Temperature Coeffcient	DIN EN 60751 (IEC 751) \| 3850 ppm/°C
TTM100/TTM1K NIST Certification Points	3 Point NIST: 20%, 50% \& 80% of span 5 Point NIST: 20%, 35%, 50%, 65%, 80% of span
Transmitter Supply Voltage \| Supply Current	+8.5 to 32 VDC (Reverse Polarity Protected) \| 25 mA minimum 250 Ohm Load: +13.5 to 32 VDC \| 500 Ohm Load: +18.5 to 32 VDC
Matched Calibrated Temperature Spans (A/TTM models) Range	-45 to 155°C (-49 to 311°F)
Enclosure Specifications (Material, Flammability, Temperature, NEMA/IP Rating)	“-GD” Enclosure: Galvanized Steel, -40 to 121°C (-40 to 250°F), NEMA 1 (IP10) “-PB” Enclosure: -30 to 100ºC (-22 to 212ºF), ABS Plastic, UL94-5VB, Plenum Rated “-BB” Enclosure: Aluminum, -40 to 121°C (-40 to 250°F), NEMA 3R “-4X” Enclosure: Polystyrene Plastic, -40 to 70°C (-40 to 158°F), UL94-V2, NEMA 4X (IP 66)