ACI A/TTM1K-RA-24"-4-GD

Name: ACI A/TTM1K-RA-24"-4-GD
Brand: ACI
SKU: CS6288183
Availability: OutOfStock

SKU: CS6288183MPN: A/TTM1K-RA-24"-4-GDAlternate Part #: 138987

Transmitter w/ 1,000 Ohm RTD (NIST Cert), Rigid Probe Averaging, 24”, Galvanized Enclosure, 4-20mA Output

ACI A/0.1CP-D-12"-GD, A/0.1CP-D-4"-GD, A/0.1CP-D-4"-GD-NIST, A/0.1CP-D-8"-GD, A/0.1CP-D-8"-GD-NIST, A/1.8K-D-12"-GD, A/1.8K-D-18"-GD, A/1.8K-D-4"-GD, A/1.8K-D-6"-GD, A/1.8K-D-8"-GD, A/1.8K-D-8"-GD-NIST, A/1.8K-RA-18"-GD, A/1.8K-RA-24"-GD, A/1.8K-RA-36"-GD, A/100-2W-D-12"-GD

Product Details

Transmitter w/ 1,000 Ohm RTD (NIST Cert), Rigid Probe Averaging, 24”, Galvanized Enclosure, 4-20mA Output

Product Configuration

Length	24”
Sensor	TTM1K (XMTR, 1K Ω, NIST)
Enclosure	Galvanized

Product Family Specifications

Thread Size	⅛”-27 NPSM
Thermal Drift	Temp. Spans \< 100ºF (38ºC): +/- 0.04%/ºF \| Temp. Spans > 100ºF (38ºC): +/- 0.02%
Output Signals	Model Dependent: Current: 4-20 mA (2-Wire Loop Powered) \| Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
Probe Diameter	304 Stainless Steel
Sensor Accuracy	+/- 0.1% @ 0ºC (32ºF) \| +/- 0.25% @ 21ºC (70ºF) \| +/- 1.0% @ 130ºC (266ºF)
Agency Approvals	RoHS, WEEE
Conductor Material	Silver Plated Copper
Number Sensing Points	Continuous
Connections \| Wire Size	Screw Terminal Blocks (Polarity Sensitive) \| 16 AWG (1.31 mm2) to 26 AWG (0.129 mm2)
Maximum Load Resistance	(Terminal Voltage - 8.5 V) \| 0.020 A
Operating Humidity Range	5 to 90% RH, non-condensing
Min/Max Temperature Spans	Minimum Span: 50ºF (28ºC) \| Maximum Span: 400ºF (204ºC)
Storage Temperature Range	-40 to 80ºC (-40 to 176ºF)
Sensor Type \| Sensor Curve	Platinum RTD \| PTC (Positive Temperature Coefficient)
Lead Length \| Conductor Size	12” (30.5 cm) \| 22 AWG (0.65mm)
Sensor Output @ 0ºC (32ºF)	1000 Ohms nominal
Terminal Block Torque Rating	0.37 ft-lb (0.5 Nm ) nominal
Warm Up Time \| Warm Up Drift	10 Minutes \| +/- 0.1%
Calibrated Accuracy \| Linearity	Temp. Spans \< 500ºF (260ºC): +/- 0.2%
Lead Wire Insulation \| Wire Rating	Etched Teflon (PTFE) Colored Leads \| Mil Spec 16878/4 Type E
Sensor Operating Temperature Range	-40 to 135ºC (-40 to 275ºF)
Transmitter Operating Humidity Range	0 to 90%, non-condensing
Din Standard \| Temperature Coeffcient	DIN EN 60751 (IEC 751) \| 3850 ppm / ºC
Fitting Material \| Flammability Rating	Polyamide 66 (High Performance Nylon 66) \| UL94-HB
TTM100/TTM1K NIST Certification Points	3 Point NIST: 20%, 50% \& 80% of span \| 5 Point NIST: 20%, 35%, 50%, 65%, 80% of span
Foam Pad Material \| Flammability Rating	Neoprene/EPDM/SBR Polymer \| UL94-HBF; FMVSS-302; MIL-R-6130C
Transmitter Operating Temperature Range	-40ºF to 185ºF (-40 to 85ºC)
Transmitter Supply Voltage \| Supply Current	+8.5 to 32 VDC (Reverse Polarity Protected) \| 25 mA minimum 250 Ohm Load: +13.5 to 32 VDC \| 500 Ohm Load: +18.5 to 32 VDC
Platinum RTD Response Time (63% Step Change)	15 Seconds nominal
Platinum RTD (PTC) \| Number Wires (Wire Colors)	Three \| Black/Black/White (Polarity Sensitive)
Enclosure Specifications (Material, Operating Temperature, NEMA Ratings)	“-GD” Enclosure: -40 to 115ºC (-40 to 239ºF); Galvanized Steel; NEMA 1 (IP10) “-PB” Enclosure: -30 to 90ºC (-22 to 194ºF); ABS Plastic; UL94-HB; Plenum Rated “-BB” Enclosure: -40 to 115ºC (-40 to 239ºF); Aluminum; NEMA 3R (IP 14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF); Polystyrene Plastic; UL94-V2; NEMA 4X (IP 66)