Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/10KS-INW-2.5"-GD

SKU: CS6288075MPN: A/10KS-INW-2.5"-GDAlternate Part #: 138490

10,000 Ohm Thermistor, Immersion, No Well, 2.5”, Galvanized Enclosure

ACI A/0.1AN-INW-4"-GD, A/0.1AN-INW-6"-GD, A/0.1AN-INW-6"-GD-NIST, A/0.1CP-INW-12"-GD, A/0.1CP-INW-2.5"-GD, A/0.1CP-INW-2.5"-GD-NIST, A/0.1CP-INW-4"-GD, A/0.1CP-INW-4"-GD-NIST, A/0.1CP-INW-6"-GD, A/0.1CP-INW-6"-GD-NIST, A/0.1CP-INW-8"-GD, A/1.8K-INW-12"-GD, A/1.8K-INW-2.5"-GD, A/1.8K-INW-4"-GD, A/1.8K-INW-6"-GD
Contact us for pricing and availability

Product Details

10,000 Ohm Thermistor, Immersion, No Well, 2.5”, Galvanized Enclosure

Product Configuration

Length 2.5”
Sensor 10KS (10,000 Ω)
Enclosure Galvanized
Thermowell Type No Well

Product Family Specifications

Sensor Type: Thermistor
Number Wires: Two (Non-Polarity Sensitive)
Sensor Curve: Non-Linear, NTC (Negative Temperature Coefficient)
Probe Diameter: 0.250” (6.35mm)
Probe Material: 304 Stainless Steel
Sensor Threads: ½” NPS (National Pipe Straight) Male Thread
Sensor Accuracy: +/-0.2ºC (+/-0.36ºF) A/10K-E1 Series: +/- 0.3ºC (+/-0.54ºF) A/1.8K Series: +/-0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)
Agency Approvals: CE, UKCA, RoHS2, WEEE
Conductor Material: Silver Plated Copper
Number Sensing Points: One
Operating Humidity Range: 10 to 95% RH, non-condensing
Storage Temperature Range: -40 to 85ºC (-40 to 185ºF)
Power Dissipation Constant: 3 mW/ºC A/1.8K Series: 1 mW/ºC A/10K-E1 Series: 2 mW/ºC
Operating Temperature Range: -40 to 150ºC (-40 to 302ºF)
Enclosure Temperature Rating: “-GD” Enclosure: -40 to 115ºC (-40 to 239ºF), Galvanized Steel, NEMA 1 (IP10) “-PB” Enclosure: -30 to 100ºC (-22 to 212ºF), ABS Plastic, UL94-5VB, Plenum Rated “-BB” Enclosure: -40 to 115ºC (-40 to 239ºF), Aluminum, NEMA 3R (IP14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF), Polystyrene Plastic, NEMA 4X (IP66)
Lead Length | Conductor Size: 14” (35.6 cm) | 22 AWG (0.65mm)
Response Time (63% Step Change): 10 Seconds nominal
Lead Wire Insulation | Wire Rating: Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Thermowell Material | Bore Diameter: 304 Series Stainless Steel | 0.260”
Fitting Material | Flammability Rating: Polyamide 66 (High Performance Nylon 66) | UL94-HB
Foam Pad Material | Flammability Rating: Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Thermowell Instrument Thread | Process Thread: ½” NPS (National Pipe Straight) Female Thread | ½” NPT (National Pipe Tapered) Male Thread

Specifications

SKUCS6288075
MPNA/10KS-INW-2.5"-GD
Alternate Part #138490

You may also like