Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/RH2-AN-SP-05

SKU: CS6288026MPN: A/RH2-AN-SP-05Alternate Part #: 138315

Relative Humidity, RH Outputs: 0-5 (Default) \& 0-10 VDC, Wall Plate 304SS, ± 2% Accuracy, 10,000 Ohm Thermistor (Type III)

ACI A/RH2-1.8K-SP-010, A/RH2-100-3W-SP-010, A/RH2-10K-E1-SP-010, A/RH2-1K-2W-SP-010, A/RH2-1K-2W-SP-010-NIST, A/RH2-1K-NI-SP-010, A/RH2-20K-SP-010, A/RH2-20K-SP-010-NIST, A/RH2-3K-SP-010, A/RH2-50K-SP-010, A/RH2-50K-SP-05, A/RH2-AN-SP-010, A/RH2-AN-SP-05, A/RH2-CP-SP-010, A/RH2-CP-SP-05
Contact us for pricing and availability

Product Details

Relative Humidity, RH Outputs: 0-5 (Default) \& 0-10 VDC, Wall Plate 304SS, ± 2% Accuracy, 10,000 Ohm Thermistor (Type III)

Product Configuration

Humidity Output 0-5VDC
Accuracy (Humidity) +/-2%
Sensor For Combination AN (10K Ω, Type III)

Product Family Specifications

Output Signals 3-wire: 0-5 or 0-10 VDC
Product Weight 0.235 lbs. (0.107 kg)
RH Sensor Type Capacitive with Hydrophobic Filter
Supply Current 8 mA maximum (0.32 VA)
Supply Voltage 0-5 VDC: 12 - 40 VDC / 18 - 28 VAC 0-10 VDC: 18 - 40 VDC / 18 - 28 VAC
Agency Approvals CE, RoHS, WEEE
Operating RH Range 0 to 95% RH, non-condensing (Conformally Coated PCB’s)
Product Dimensions 4.51” (114.56 mm) x 2.76” (70.10 mm) x 1.25” (31.75 mm)
Insulation | Rating Etched Teon (PTFE) Colored Leads | Mil Spec 16878/4 Type E
RH NIST Test Points Default Test Points: 3 Points (20%, 50% \& 80%)
Wall Plate Material 430 Stainless Steel (Brushed Stainless Steel Finish)
RH Measurement Range 0-100%
RH Response Time (T63) 20 Seconds Typical
Connections | Wire Size Screw Terminal Blocks (Polarity Sensitive) | 16 (1.31 mm²) to 26 AWG (0.129 mm²)
Foam Flammability Rating FMVSS-302
Sintered Filter Material 304 Series Stainless Steel
RH Output Load Resistance 4K Ohms Minimum
Storage Temperature Range -40 to 149°F (-40 to 65°C)
Power Dissipation Constant 3 mW/°C except 1.8K Series: 1 mW/°C; 10K-E1 Series: 2 mW/°C
Operating Temperature Range -40 to 140°F (-40 to 60°C)
RH Accuracy @ 77°F (25°C) Model Dependent: +/- 2%, or 3% from 10 to 95%
Accuracy 0-70ºC (32-158ºF) +/- 0.36°F (0.2°C) except 10K-E1 Series: +/- 0.54°F (0.3°C) 1.8K Series: +/- 0.9°F (0.5°C) @ 77°F (25°C) \& +/- 1.8°F (1.0°C) from 32 to 158°F (0 to 70°C)
Lead Length | Conductor Size 14” (35.6 cm) | 22 AWG (0.65 mm)
Terminal Block Torque Rating 4.43 to 5.31 lb-in (0.5 to 0.6 Nm)
Foam Material | Foam Thickness Cross-linked LPDE (White) | 0.25” (6.35 mm)
Response Time (63% Step Change) 10 Seconds nominal
RH Transmitter Stabilization Time 30 Minutes (Recommended time before doing accuracy verification)
RH Stability | Repeatability | Sensitivity Less than 2% drift / 5 years | 0.5% RH | 0.1% RH
Nominal Thermistor Resistive Output @ 77°F (25°C) (Lead Wire Colors) RHx-1.8K Series: 1.8K (Red/Yellow) RHx-3K Series: 3K (White/Brown) RHx-AN Series (Type III): 10K (White/White) RHx-AN-BC Series: 5.238K (White/Yellow) RHx-CP Series (Type II): 10K (White/Green) RHx-CSI Series: 10K (Green/Yellow) RHx-10KS Series: 10K (White/Blue) RHx-10K-E1 Series: 10K (Gray/Orange) RHx-20K Series: 20K (Brown/Blue) RHx-50K Series: 50K (Brown/Yellow) RHx-100KS Series: 100K (Black/Yellow)

Specifications

SKUCS6288026
MPNA/RH2-AN-SP-05
Alternate Part #138315

You may also like