// 500+ Brands

// Authorized Distributor of Over 100 Brands

ACI A/TTM1K-LTS-4-6'

SKU: CS6287983MPN: A/TTM1K-LTS-4-6'Alternate Part #: 138079

Transmitter w/ 1,000 Ohm RTD (NIST Cert), 2” Freezer Probe 316 SS, 6’, 4-20mA Output

Contact us for pricing and availability

Product Details

Transmitter w/ 1,000 Ohm RTD (NIST Cert), 2” Freezer Probe 316 SS, 6’, 4-20mA Output

Product Configuration

Wire 6’ Teflon Insulated, LTS Only
Sensor TTM1K-LTS (XMTR, 1K Ω, Freezer, NIST)
Enclosure None

Product Family Specifications

Lead Length 10’ (3.05 m) or 30’ (9.15 m)
Number Wires Three Conductors (White and Two Red Wires); Polarity Sensitive (Red wires tied together)
Output Signals Current: 4-20 mA (2-Wire Loop Powered) Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
Product Weight A/TT/TTMxxx-LTS-BB-10’: 0.84 lbs (0.39 kg) A/TT/TTMxxx-LTS-BB-30’: 1.04 lbs (0.48 kg) A/TT/TTMxxx-LTS-4X-10’: 0.42 lbs (0.19 kg) A/TT/TTMxxx-LTS-4X-30’: 0.62 lbs (0.29 kg) A/TT/TTMxxx-LTS-GD-10’: 0.73 lbs (0.32 kg) A/TT/TTMxxx-LTS-GD-30’: 0.93 lbs (0.43 kg)
Sensor Accuracy Accuracy Formula: +/- ºC \= (+/- 0.30ºC + (0.005 x |t|)) -200°C (-328°F): +/- 1.30°C (+/- 2.43°F) | 0°C (-32°F): +/- 0.30°C (+/- 0.54°F)
Agency Approvals CE, UKCA, WEEE, RoHS
TT Temperature Drift Temp. Spans \< 100ºF (38ºC): +/- 0.04%/ºF | Temp. Spans > 100ºF (38ºC): +/- 0.02%
Platinum RTD Stability \< 0.04% @ 1000 hours @ 400ºC (752ºF)
Connections | Wire Size Screw Terminal Blocks (Polarity Sensitive) | 16 AWG (1.31 mm2) to 26 AWG (0.129 mm2)
Maximum Load Resistance Terminal Voltage - 8.5 V | 0.020 A | (775 Ohms @ 24 VDC)
Temperature Coefficient 3850 ppm / ºC | DIN EN 60751 (IEC 751)
Operating Humidity Range 0 to 95%, non-condensing
Platinum RTD Din Standard DIN EN 60751 (IEC 751)
Storage Temperature Range -40ºF (-40ºC) to 185ºF (85ºC)
Sensor Type | Sensor Curve Platinum RTD | Linear, PTC (Positive Temperature Coefficient)
Calibrated Temperature Spans Minimum Temp. Span: 50ºF (28ºC) | Maximum Temp. Span: 1000ºF (538ºC)
Platinum RTD Tolerance Class Class B
Sensor Output @ 0ºC (32ºF) A/TT/TTM100-LTS Series: 100 Ohms nominal A/TT/TTM1K-LTS Series: 1000 Ohms nominal
Terminal Block Torque Rating 0.5 Nm nominal
Operating TT Temperature Range -40ºF (-40ºC) to 185ºF (85ºC)
TT Warm Up Time | Warm Up Drift 10 Minutes | +/- 0.1%
Probe Material | Length | Diameter 316 Stainless Steel | 2” (50.8 mm) | 0.1875” (4.76 mm) nominal
Sensor Operating Temperature Range -198 to 150ºC (-324 to 302ºF)
TT Calibrated Accuracy | Linearity Temp. Spans \< 500ºF (260ºC): +/- 0.2% | Temp. Spans > 500ºF (260ºC): +/- 0.5%
Conductor Size | Conductor Material 24 AWG (0.51 mm) | Silver Plated Copper
Lead Wire Insulation | Jacket Color FEP/FEP (Teflon) Jacketed Cable | White
Cable Gland IP Rating | Torque Rating IP 68 (NEMA 6P) | 2.5 Nm (22.127 lb. inch)
TTM100/TTM1K NIST Certification Points 3 Point NIST: 20%, 50% \& 80% of span | 5 Point NIST: 20%, 35%, 50%, 65%, 80% of span
Transmitter Supply Voltage | Supply Current +13.5 to 32 VDC into 250 Ohm Load (Reverse Polarity Protected) | 25 mA minimum +18.5 to 32 VDC into 500 Ohm Load
Platinum RTD Response Time (63% Step Change) A/TT/TTM100-LTS Series: In still air: 3:40 (Min:Sec) In water: 19 (Sec) A/TT/TTM1K-LTS Series: In still air: 3:50 (Min:Sec) In water: 22 (Sec)
Cable Gland Sleeve Material | Wire Clamping Size Neoprene | 0.098” (2.5 mm) to 0.256” (6.5 mm)
Cable Gland (Fitting) Size | Hole Size | Material PG7 | 15 mm (0.591”) | Polyamide 6
Matched Calibrated Temperature Spans (A/TTM models) Range -45 to 155ºC (-49 to 311ºF)
Enclosure Specifications (Material, Flammability, Temperature, NEMA/IP Rating) “-GD” Enclosure: -40 to 121ºC (-40 to 250ºF); Galvanized Steel; NEMA 1 (IP10) “-BB” Enclosure: Aluminum, -40 to 121ºC (-40 to 250ºF), Plenum Rated, NEMA 3R (IP 14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF); Polystyrene Plastic; UL94-V2; NEMA 4X (IP 66)

Specifications

SKUCS6287983
MPNA/TTM1K-LTS-4-6'
Alternate Part #138079