Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/TTM1K-LT-D-8"-4-GD

SKU: CS6287932MPN: A/TTM1K-LT-D-8"-4-GDAlternate Part #: 137794

Transmitter w/ 1,000 Ohm RTD (NIST Cert), Low Temperature Duct, 8” 316 SS, Galvanized Enclosure, 4-20mA Output

ACI A/TT100-HT-D-12"-1-GD, A/TT100-HT-D-12"-4-GD, A/TT100-HT-D-18"-2-GD, A/TT100-HT-D-18"-4-GD, A/TT100-HT-D-4 -1-GD, A/TT100-HT-D-4"-2-GD, A/TT100-HT-D-4"-4-GD, A/TT100-HT-D-8"-1-GD, A/TT100-HT-D-8"-4-GD, A/TT100-LT-D-12"-4-GD, A/TT100-LT-D-8"-2-GD, A/TT100-LT-D-8"-4-GD, A/TT1K-HT-D-12"-1-GD, A/TT1K-HT-D-12"-2-GD, A/TT1K-HT-D-12"-4-GD
Contact us for pricing and availability

Product Details

Transmitter w/ 1,000 Ohm RTD (NIST Cert), Low Temperature Duct, 8” 316 SS, Galvanized Enclosure, 4-20mA Output

Product Configuration

Sensor TTM1K-LT (XMTR, 1K Ω, Low Temp, NIST)
Temperature Series Low Temperature Transmitters

Product Family Specifications

Stability \< 0.04 % at 1000 hours at 400ºC
Number Wires A/100-3W-LT-I-XX” and A/1K-3W-LT-I-xx”: Three (White / Two Red) Polarity Sensitive)
Output Signals Current: 4-20 mA (2-Wire Loop Powered) | Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
Probe Diameter 0.250” (6.35mm)
Probe Material 316 Stainless Steel
Agency Approvals RoHS2, WEEE
Temperature Drift Temp. Spans \< 100ºF (38ºC): +/- 0.04%/ºF | Temp. Spans > 100ºF (38ºC): +/- 0.02%
Number Sensing Points One
Connections | Wire Size Screw Terminal Blocks (Non-Polarity Sensitive) | 16 AWG (1.31 mm2) to 26 AWG (0.129 mm2)
Maximum Load Resistance (Terminal Voltage - 8.5 V) | 0.020 A
Operating Humidity Range 10 to 95% RH, non-condensing
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Sensor Type | Sensor Curve Platinum RTD | PTC (Positive Temperature Coefficient)
Operating Temperature Range -40ºF (-40ºC) to 185ºF (85ºC)
Sensor Tolerance | Accuracy +/- 0.12% Class B | Class B Tolerance Formula: +/- ºC \= (0.30ºC + (0.005 * |t|))
Calibrated Temperature Spans Minimum Temp. Span: 50ºF (28ºC) | Maximum Temp. Span: 700ºF (370ºC)
Compression Fitting Material 316 Stainless Steel
Lead Length | Conductor Size 8’ (2.44 m) | 22 AWG (0.25 mm)
Sensor Output @ 0ºC (32ºF) A/100-3W-LT-I-xx”: 100 Ohms nominal | A/1K-3W-LT-I-xx”: 1000 Ohms nominal
Terminal Block Torque Rating 0.5 Nm nominal
TT Warm Up Time | Warm Up Drift 10 Minutes | +/- 0.1%
Lead Wire Insulation | Wire Rating Etched Teflon (PTFE) | Silver Plated Copper
Sensor Operating Temperature Range -198 to 150ºC (-324 to 302ºF)
TT Calibrated Accuracy | Linearity Temp. Spans \< 500ºF (260ºC): +/- 0.2% | Temp. Spans > 500ºF (260ºC): +/- 0.5%
Din Standard | Temperature Coeffcient DIN EN 60751 (IEC 751) | 3850 ppm / ºC
Self-Heating | Maximum Operating Current 100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA | 1K Ohm RTD: 4 mW/°C (Still Air) | 3 mA
Transmitter Supply Voltage | Supply Current +8.5 to 32 VDC (Reverse Polarity Protected) | 25 mA minimum 250 Ohm Load: +13.5 to 32 VDC | 500 Ohm Load: +18.5 to 32 VDC
Enclosure Specifications (Material, Flammability, Temperature, NEMA/IP Rating) “-GD” Enclosure: -40 to 199ºC (-40 to 390ºF); Galvanized Steel; NEMA 1 (IP10) “-BB” Enclosure: Aluminum, -40 to 121ºC (-40 to 250ºF), Plenum Rated, NEMA 3R

Specifications

SKUCS6287932
MPNA/TTM1K-LT-D-8"-4-GD
Alternate Part #137794

You may also like