Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/100-2W-S-PB

SKU: CS6287538MPN: A/100-2W-S-PBAlternate Part #: 135211

100 Ohm (Two Wires) RTD, Strap On, Plastic Box

ACI A/1.8K-S-PB, A/100-2W-S-PB, A/100-3W-S-PB, A/100-3W-S10-PB, A/100KS-S-PB, A/10K-E1-S-PB, A/10KS-S-PB, A/1K-2W-S-PB, A/1K-3W-S-PB, A/1K-NI-S-PB, A/3K-S-PB, A/50K-S-PB, A/AN-BC-S-PB, A/AN-S-PB, A/BALCO-S-PB
Contact us for pricing and availability

Product Details

100 Ohm (Two Wires) RTD, Strap On, Plastic Box

Product Configuration

Sensor 100-2W (100 Ω, 2 wires)
Enclosure Plastic

Product Family Specifications

Number Wires A/100-2W-S Series and A/1K-2W-S Series: Two (Non-Polarity Sensitive) A/100-3W-S Series and A/1K-3W-S Series: Three (Polarity Sensitive)
Product Weight A/100/1K-XX-GD: 0.81 lbs. (0.37kg) | A/100/1K-XX-PB: 0.41 lbs. (0.19kg); A/100/1K-XX-4X: 0.56 lbs. (0.25kg)
Sensor Accuracy +/- 0.06% Class A (Tolerance Formula: +/- ºC \= (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC) -40ºC (-40ºF): +/- 0.23ºC (+/- 0.41ºF) | 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF) 93ºC (200ºF): +/- 0.34ºC (+/- 0.61ºF)
Agency Approvals CE, RoHS, WEEE
Conductor Material Silver Plated Copper
Pipe Sizes Accepted A/100/1K-S-XX: 1 ¼” (32mm) to 4” (100mm) | A/100/1K-S10-XX: 2” (50mm) to 10” (250mm)
Number Sensing Points One
Platinum RTD Stability +/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Operating Humidity Range 10 to 95% RH, non-condensing
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Sensor Type | Sensor Curve Platinum RTD | PTC (Positive Temperature Coefficient)
Lead Length | Conductor Size 14” (35.6cm) | 22 AWG (0.65mm)
Sensor Output @ 0ºC (32ºF) A/100-xW-S Series: 100 Ohms nominal | A/1K-xW-S Series: 1000 Ohms nominal
Lead Wire Insulation | Wire Rating Etched Teflon (PTFE) Colored Leads | MIL-W-16878/4 (Type E)
Din Standard | Temperature Coeffcient DIN EN 60751 (IEC 751) | 3850 ppm / ºC
Foam Pad Material | Flammability Rating Neoprene/EPDM/SBR Polymer | UL94-HF1; MIL-R-6130C; FMVSS-302
Self-Heating | Maximum Operating Current 100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA 1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA
Platinum RTD Response Time (63% Step Change) 30 Seconds nominal
Enclosure Specifications (Material, Operating Temperature, NEMA Ratings) A/100/1K-S-GD: Galvanized Steel, -40 to 93ºC (-40 to 200ºF), NEMA 1 (IP 10) A/100/1K-PB: ABS Plastic, -30 to 85ºC (-22 to 185ºF), UL94-HB, Plenum Rated A/100/1K-S-4X: Polystyrene Plastic, -40 to 70ºC (-40 to 158ºF), UL94-V2, NEMA 4X (IP 66)

Specifications

SKUCS6287538
MPNA/100-2W-S-PB
Alternate Part #135211

You may also like