Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/TTM100-D-8"-4-EXPL

SKU: CS6287455MPN: A/TTM100-D-8"-4-EXPLAlternate Part #: 134324

Transmitter w/ 100 Ohm RTD (NIST Cert), Hazardous, Duct, 8”, 4-20mA Output

ACI A/1.8K-D-12"-EXPL, A/1.8K-D-4"-EXPL, A/1.8K-D-8"-EXPL, A/100-2W-D-8"-EXPL, A/100-3W-D-12"-EXPL, A/100-3W-D-18"-EXPL, A/100-3W-D-4"-EXPL, A/100-3W-D-8"-EXPL, A/100KS-D-4"-EXPL-NIST, A/10K-E1-D-18"-EXPL, A/10K-E1-D-8"-EXPL, A/1K-2W-D-12"-EXPL, A/1K-2W-D-18"-EXPL, A/1K-2W-D-4"-EXPL, A/1K-2W-D-8"-EXPL
Contact us for pricing and availability

Product Details

Transmitter w/ 100 Ohm RTD (NIST Cert), Hazardous, Duct, 8”, 4-20mA Output

Product Configuration

Length 8”
Sensor TTM100 (XMTR, 100 Ω, NIST)
Configuration Duct

Product Family Specifications

Stability +/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Sensor Type Platinum RTD
Number Wires Two
Sensor Curve PTC (Positive Temperature Coefficient)
Thermal Drift Temp. Spans \< 100ºF (38ºC): +/- 0.04%/ºF | Temp. Spans > 100ºF (38ºC): +/- 0.02%
Output Signals Current: 4-20 mA (2-Wire; Loop Powered) Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
Probe Diameter 0.250” (6.35mm) nominal
Probe Material 304 Stainless Steel
Product Weight Room: 1.9 lbs Duct: 4.5 lbs Immersion: 4.85 lbs
Sensor Threads ½” NPT Threads
Sensor Accuracy +/- 0.06% Class A | (Tolerance Formula: +/- ºC \= (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC)
Agency Approvals RoHS2, WEEE
Lead Wire Colors A/TT100/TTM100-EXPL: Brown/Brown A/TT1K/TTM1K-EXPL: (Black/Black)
Protection Level Thermally Conductive, Low Moisture, Corrosion Resistant Epoxy / Plastic Cup
Conductor Material Silver Plated Copper
Number Sensing Points One
Connections | Wire Size 22 AWG (0.654 mm) Colored Leads; Polarity Sensitive | 22 to 15 AWG Wire Nuts
Maximum Load Resistance (Terminal Voltage - 8.5 V) | 0.020 A
Operating Humidity Range 0 to 95% RH, non-condensing
Enclosure Hubs | Hub Size Two | ½” NPT Female Hubs
Min/Max Temperature Spans Minimum Temp. Span: 50ºF (28ºC) Maximum Temp. Span: 500ºF (260ºC)
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Operating Temperature Range -40 to 200ºC (-40 to 392ºF)
Enclosure UL | CSA Standards UL 1203 | CSA C22.2 No. 30
Lead Length | Conductor Size 14” (35.6 cm) or 24” (61 cm) | 22 AWG (0.65mm)
Sensor Output @ 0ºC (32ºF) A/TT100/TTM100-EXPL: 100 Ohms A/TT1K/TTM1K-EXPL: 1000 Ohms
Warm Up Time | Warm Up Drift 10 Minutes | +/- 0.1%
Calibrated Accuracy | Linearity Temp. Spans \< 500ºF (260ºC): +/- 0.2% | Temp. Spans > 500ºF (260ºC): +/- 0.5%
Response Time (63% Step Change) 8 Seconds nominal
Enclosure Explosion Proof Rating CL. I, Div. 1 \& 2, Groups A, B, C, D
Lead Wire Insulation | Wire Rating Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Thermowell Material | Bore Diameter 304 Stainless Steel | 0.260” nominal
Enclosure Dust-Ignition Proof Rating CL. II, Div. 1, Groups E, F, G
Din Standard | Temperature Coeffcient DIN EN 60751 (IEC 751) | 3850 ppm / ºC
TTM100/TTM1K NIST Certification Points 3 Point NIST: 20%, 50% \& 80% of span 5 Point NIST: 20%, 35%, 50%, 65%, 80% of span
Enclosure Raintight | Wet Locations Ratings CL. II, Div. 2, Groups F, G | CL. III
Transmitter Supply Voltage | Supply Current +8.5 to 32 VDC (Reverse Polarity Protected) | 25 mA minimum 250 Ohm Load (1-5 VDC): +13.5 to 32 VDC 500 Ohm Load (2-10 VDC): +18.5 to 32 VDC
Thermowell Instrument Thread | Process Thread ½” NPS (National Pipe Straight) Female Thread | ½” NPT (National Pipe Tapered) Male Thread
Enclosure Specifications (Material, Operating Temperature, NEMA Ratings) “-D” Enclosure: Feraloy® Iron Alloy, -50 to 60ºC (-58 to 140ºF), NEMA 3, 4, 7ABCD, 9EFG “-I or -INW” Enclosure: Feraloy® Iron Alloy, -50 to 60ºC (-58 to 140ºF), NEMA 3, 4, 7ABCD, 9EFG “-R” Enclosure: Copper-Free Aluminum, -50 to 60ºC (-58 to 140ºF), NEMA 3, 4, 7ABCD, 9EFG

Specifications

SKUCS6287455
MPNA/TTM100-D-8"-4-EXPL
Alternate Part #134324

You may also like