Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/100-2W-INW-18"-GD

SKU: CS6287415MPN: A/100-2W-INW-18"-GDAlternate Part #: 133938

100 Ohm (Two Wires) RTD, Immersion, No Well, 18”, Galvanized Enclosure

ACI A/0.1AN-INW-4"-GD, A/0.1AN-INW-6"-GD, A/0.1AN-INW-6"-GD-NIST, A/0.1CP-INW-12"-GD, A/0.1CP-INW-2.5"-GD, A/0.1CP-INW-2.5"-GD-NIST, A/0.1CP-INW-4"-GD, A/0.1CP-INW-4"-GD-NIST, A/0.1CP-INW-6"-GD, A/0.1CP-INW-6"-GD-NIST, A/0.1CP-INW-8"-GD, A/1.8K-INW-12"-GD, A/1.8K-INW-2.5"-GD, A/1.8K-INW-4"-GD, A/1.8K-INW-6"-GD
Contact us for pricing and availability

Product Details

100 Ohm (Two Wires) RTD, Immersion, No Well, 18”, Galvanized Enclosure

Product Configuration

Length 18”
Sensor 100-2W (100 Ω, 2 wires)

Product Family Specifications

Stability +/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Sensor Type Platinum RTD
Number Wires A/100-2W-I Series and A/1K-2W-I Series: Two (Non-Polarity Sensitive) A/100-3W-I Series and A/1K-3W-I Series: Three (Polarity Sensitive)
Sensor Curve PTC (Positive Temperature Coefficient)
Probe Diameter 0.250” (6.35mm)
Probe Material 304 Stainless Steel
Sensor Threads ½” NPS (National Pipe Straight) Male Thread
Sensor Accuracy +/- 0.06% Class A (Tolerance Formula: +/- ºC \= (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC) -40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF) 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF) 200ºC (392ºF): +/- 0.55ºC (+/- 1.00ºF)
Agency Approvals CE, UKCA, RoHS2, WEEE
Conductor Material Silver Plated Copper
Number Sensing Points One
Operating Humidity Range 10 to 95% RH, non-condensing
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Operating Temperature Range -40 to 200ºC (-40 to 392ºF)
Enclosure Temperature Rating “-GD” Enclosure: -40 to 115ºC (-40 to 239ºF), Galvanized Steel, NEMA 1 (IP10) “-PB” Enclosure: -30 to 100ºC (-22 to 212ºF), ABS Plastic, UL94-5VB, Plenum Rated “-BB” Enclosure: -40 to 115ºC (-40 to 239ºF), Aluminum, NEMA 3R (IP14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF), Polystyrene Plastic, NEMA 4X (IP66)
Lead Length | Conductor Size 14” (35.6 cm) | 22 AWG (0.65mm)
Sensor Output @ 0ºC (32ºF) A/100-xW-I Series: 100 Ohms nominal A/1K-xW-I Series: 1000 Ohms nominal
Response Time (63% Step Change) 8 Seconds nominal
Lead Wire Insulation | Wire Rating Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Thermowell Material | Bore Diameter 304 Series Stainless Steel | 0.260”
Din Standard | Temperature Coeffcient DIN EN 60751 (IEC 751) | 3850 ppm / ºC
Fitting Material | Flammability Rating Polyamide 66 (High Performance Nylon 66) | UL94-HB
Foam Pad Material | Flammability Rating Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Self-Heating | Maximum Operating Current 100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA 1K Ohm RTD: 4 mW/ºC (Still Air) | 3 mA
Thermowell Instrument Thread | Process Thread ½” NPS (National Pipe Straight) Female Thread | ½” NPT (National Pipe Tapered) Male Thread

Specifications

SKUCS6287415
MPNA/100-2W-INW-18"-GD
Alternate Part #133938

You may also like