ACI A/TT1K-S-4-PB

Name: ACI A/TT1K-S-4-PB
Brand: ACI
SKU: CS6286867
Availability: OutOfStock

SKU: CS6286867MPN: A/TT1K-S-4-PBAlternate Part #: 128940

Transmitter w/ 1,000 Ohm RTD, Strap On, Plastic Enclosure, 4-20mA Output

ACI A/1.8K-S-PB, A/100-2W-S-PB, A/100-3W-S-PB, A/100-3W-S10-PB, A/100KS-S-PB, A/10K-E1-S-PB, A/10KS-S-PB, A/1K-2W-S-PB, A/1K-3W-S-PB, A/1K-NI-S-PB, A/3K-S-PB, A/50K-S-PB, A/AN-BC-S-PB, A/AN-S-PB, A/BALCO-S-PB

Product Details

Transmitter w/ 1,000 Ohm RTD, Strap On, Plastic Enclosure, 4-20mA Output

Product Configuration

Sensor	TT1K (XMTR, 1K Ω)
Enclosure	Plastic
Transmitter Output	4-20mA

Product Family Specifications

Sensor Type	Platinum RTD
Sensor Curve	PTC (Positive Temperature Coefficient)
Output Signals	Current: 4-20 mA (2-Wire, Loop Powered) \| Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
Plate Material	Copper
Product Weight	A/XX-S-GD: 0.83 lbs. (0.38kg) \| A/XX-S-PB: 0.43 lbs. (0.20kg) \| A/XX-S-4X: 0.58 lbs. (0.27kg)
Agency Approvals	RoHS2, WEEE
Temperature Drift	Temp. Spans \< 100ºF (38ºC): +/- 0.04%/ºF \| Temp. Spans > 100ºF (38ºC): +/- 0.02%
Conductor Material	Silver Plated Copper
Pipe Sizes Accepted	1 ¼” (32 mm) to 4” (100 mm)
Connections \| Wire Size	Screw Terminal Blocks (Polarity Sensitive) \| 16 AWG (1.31 mm2) to 26 AWG (0.129 mm2)
Maximum Load Resistance	Terminal Voltage - 8.5 V) \| 0.020 A
Operating Humidity Range	10 to 90% RH, non-condensing
Storage Temperature Range	-40 to 75ºC (-40 to 167ºF)
Calibrated Temperature Spans	Minimum Temp. Span: 50ºF (28ºC) \| Maximum Temp. Span: 300ºF (148ºC)
Lead Length \| Conductor Size	14” (35.6 cm) \| 22 AWG (0.65 mm)
Platinum RTD Tolerance Class	+/- 0.06% Class A \| (Tolerance Formula: +/- ºC \= (0.15ºC + (0.002 * \|t\|)) where \|t\| is the absolute value of Temperature above or below 0ºC in ºC)
Terminal Block Torque Rating	0.37 ft-lb (0.5 Nm ) nominal
Warm Up Time \| Warm Up Drift	10 Minutes \| +/- 0.1%
Calibrated Accuracy \| Linearity	Temp. Spans \< 500ºF (260ºC): +/- 0.2% \| Temp. Spans > 500ºF (260ºC): +/- 0.5%
Lead Wire Insulation \| Wire Rating	Etched Teflon (PTFE) Colored Leads \| MIL-W-16878/4 (Type E)
Transmitter Operating Humidity Range	0 to 90%, non condensing
Din Standard \| Temperature Coeffcient	DIN EN 60751 (IEC 751) \| 3850 ppm / ºC
TTM100/TTM1K NIST Certification Points	3 Point NIST: 20%, 50% \& 80% of span \| 5 Point NIST: 20%, 35%, 50%, 65%, 80% of span
Foam Pad Material \| Flammability Rating	Neoprene/EPDM/SBR Polymer \| UL94-HF1; MIL-R-6130C; FMVSS-302
Transmitter Operating Temperature Range	-40ºF to 185ºF (-40 to 85ºC)
Nominal Sensor Resistance @ 32ºF (0ºC)	A/TT/TTM100 Series: 100 Ohms \| A/TT/TTM1K Series: 1000 Ohms
Transmitter Supply Voltage \| Supply Current	+8.5 to 32 VDC (Reverse Polarity Protected) \| 25 mA minimum 250 Ohm Load: +13.5 to 32 VDC \| 500 Ohm Load: +18.5 to 32 VDC
Enclosure Specifications (Material, Flammability, Temperature, NEMA/IP Rating)	A/XX-S-GD: Galvanized Steel, -40 to 93ºC (-40 to 200ºF), NEMA 1 (IP 10) A/XX-S-PB: ABS Plastic, -30 to 85ºC (-22 to 185ºF), UL94-HB, Plenum Rated A/XX-S-4X: Polystyrene Plastic, -40 to 70ºC (-40 to 158ºF), UL94-V2, NEMA 4X (IP 66)