ACI A/1K-3W-HT-I-4"-BB

Name: ACI A/1K-3W-HT-I-4"-BB
Brand: ACI
SKU: CS6286862
Availability: OutOfStock

SKU: CS6286862MPN: A/1K-3W-HT-I-4"-BBAlternate Part #: 128842

1,000 Ohm (Three Wires) RTD, High Temperature Immersion, 4”, NEMA 3R Enclosure

ACI A/1.8K-I-2.5"-BB, A/1.8K-I-4"-BB, A/1.8K-I-6"-BB, A/100-2W-I-2.5"-BB, A/100-2W-I-4"-BB, A/100-2W-I-6"-BB-NIST, A/100-3W-HT-I-2.5"-BB, A/100-3W-I-2.5"-BB, A/100-3W-I-2.5"-BB-NIST, A/100-3W-I-4"-BB, A/100-3W-I-4"-BB-NIST, A/100KS-I-2.5"-BB, A/100KS-I-4"-BB, A/10KS-I-2.5"-BB, A/10KS-I-2.5"-BB-NIST

Product Details

1,000 Ohm (Three Wires) RTD, High Temperature Immersion, 4”, NEMA 3R Enclosure

Product Configuration

Length	4”
Sensor	1K-3W-HT (1,000 Ω, High Temp)
Enclosure	Aluminum, NEMA 3R
Thermowell Type	2 Part Fabricated
Temperature Series	High Temperature Sensors

Product Family Specifications

Stability	\< 0.04 % at 1000 hours at 400ºC
Sensor Type	Platinum RTD
Number Wires	A/100-3W-HT-D-XX” and A/1K-3W-HT-D-xx”: Three (White / Two Red) Polarity Sensitive)
Sensor Curve	PTC (Positive Temperature Coefficient)
Thermal Drift	Temp. Spans \< 100ºF (38ºC): +/- 0.04%/ºF \| Temp. Spans > 100ºF (38ºC): +/- 0.02%
Output Signals	Current: 4-20 mA (2-Wire Loop Powered) Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
Probe Diameter	0.250” (6.35mm)
Probe Material	316 Stainless Steel
Agency Approvals	RoHS2, WEEE
Number Sensing Points	One
Connections \| Wire Size	Screw Terminal Blocks (Non-Polarity Sensitive) \| 16 AWG (1.31 mm2) to 26 AWG (0.129 mm2)
Maximum Load Resistance	(Terminal Voltage - 8.5 V) \| 0.020 A
Operating Humidity Range	10 to 90% RH, non-condensing
Min/Max Temperature Spans	Minimum Temp. Span: 50ºF (28ºC) Maximum Temp. Span: 800ºF (426ºC)
Storage Temperature Range	-40 to 85ºC (-40 to 185ºF)
Operating Temperature Range	-40 to 395ºC (-40 to 743ºF)
Sensor Tolerance \| Accuracy	+/- 0.12% Class B \| Class B Tolerance Formula: +/- ºC \= (0.30ºC + (0.005 * \|t\|)) Where \|t\| is the absolute value of temperature above or below 0ºC in Centigrade
Compression Fitting Material	316 Stainless Steel
Lead Length \| Conductor Size	8’ (2.44 m) \| 24 AWG (0.20 mm2)
Sensor Output @ 0ºC (32ºF)	A/100-3W-HT-D-xx”: 100 Ohms nominal A/1K-3W-HT-D-xx”: 1000 Ohms nominal
Terminal Block Torque Rating	0.5 Nm nominal
Warm Up Time \| Warm Up Drift	10 Minutes \| +/- 0.1%
Calibrated Accuracy \| Linearity	Temp. Spans \< 500ºF (260ºC): +/- 0.2% \| Temp. Spans > 500ºF (260ºC): +/- 0.5%
Lead Wire Insulation \| Wire Rating	Fiberglass Braided Insulation with Mica Tape \| 27% Nickel Plated Copper
Thermowell Material \| Bore Diameter	304 Series Stainless Steel \| 0.260”
Din Standard \| Temperature Coeffcient	DIN EN 60751 (IEC 751) \| 3850 ppm / ºC
Self-Heating \| Maximum Operating Current	100 Ohm RTD: 7 mW/ºC (Still Air) \| 5 mA \| 1K Ohm RTD: 4 mW/°C (Still Air) \| 3 mA
Transmitter Supply Voltage \| Supply Current	+8.5 to 32 VDC (Reverse Polarity Protected) \| 25 mA minimum 250 Ohm Load: +13.5 to 32 VDC 500 Ohm Load: +18.5 to 32 VDC
Thermowell Instrument Thread \| Process Thread	½” NPS (National Pipe Straight – Female) \| ½” NPT (National Pipe Tapered – Male)