ACI A/TT100-I-4"-4-PB

Name: ACI A/TT100-I-4"-4-PB
Brand: ACI
SKU: CS6286541
Availability: OutOfStock

SKU: CS6286541MPN: A/TT100-I-4"-4-PBAlternate Part #: 123437

Transmitter w/ 100 Ohm RTD, Immersion, Welded Well, 4”, Plastic Enclosure, 4-20mA Output

ACI A/0.1AN-I-2.5"-PB, A/0.1AN-I-2.5"-PB-NIST, A/1.8K-I-2.5"-PB, A/1.8K-I-4"-PB, A/1.8K-I-6"-PB, A/100-2W-I-2.5"-PB, A/100-2W-I-4"-PB, A/100-2W-I-6"-PB, A/100-2W-I-6"-PB-NIST, A/100-3W-I-2.5"-PB, A/100-3W-I-4"-PB, A/100-3W-I-6"-PB, A/100-3W-I-6"-PB-NIST, A/100KS-I-2.5"-PB, A/100KS-I-4"-PB

Product Details

Transmitter w/ 100 Ohm RTD, Immersion, Welded Well, 4”, Plastic Enclosure, 4-20mA Output

Product Configuration

Length	4”
Sensor	TT100 (XMTR, 100 Ω)
Enclosure	Plastic
Thermowell Type	2 Part Fabricated
Transmitter Output	4-20mA

Product Family Specifications

Accuracy	(Tolerance Formula: +/- °C \= (0.15°C + (0.002 * \|t\|)) where \|t\| is the absolute value of temperature above or below 0°C
Stability	+/- 0.03% after 1000 Hours @ 300°C (572°F)
Sensor Type	Platinum RTD
Number Wires	Two
Sensor Curve	PTC (Positive Temperature Coefficient)
Output Signals	Current: 4-20 mA (2-Wire Loop Powered) Voltage: 1-5 VDC or 2-10 VDC (3-Wires)
Probe Diameter	0.250” (6.35 mm)
Lead Wire Colors	A/TT100/TTM100 Series: Brown/Brown \| A/TT1K/TTM1K Series: Black/Black
Temperature Drift	Temp. Spans \< 100°F (38°C): +/- 0.04% \| Temp. Spans > 100°F (38°C): +/- 0.02%
Number Sensing Points	One
Connections \| Wire Size	Screw Terminal Blocks (Polarity Sensitive) \| 16 AWG (1.31 mm2) to 26 AWG (0.129 mm2)
Operating Humidity Range	10 to 90% RH, non-condensing
Storage Temperature Range	-40 to 85°C (-40 to 185°F)
TT Maximum Load Resistance	(Terminal Voltage - 8.5 V) \| 0.020 A
Operating Temperature Range	-40 to 185°F (-40 to 85°C)
Calibrated Temperature Spans	Minimum Temp. Span: 50°F (28°C) \| Maximum Temp. Span: 500F (260°C)
Platinum RTD Tolerance Class	+/- 0.06% Class A
Sensor Output @ 0ºC (32ºF)	A/TT100/TTM100 Series: 100 Ohms nominal \| A/TT1K/TTM1K Series: 1000 Ohms nominal
Terminal Block Torque Rating	0.37 ft-lb (0.5 Nm) nominal
Warm Up Time \| Warm Up Drift	10 Minutes \| +/- 0.1%
Response Time (63% Step Change)	8 Seconds nominal
Sensor Operating Temperature Range	-40 to 200ºC (-40 to 392ºF)
TT Calibrated Accuracy \| Linearity	Temp. Spans \< 500°F (260°C): +/- 0.2% \| Temp. Spans > 500°F (260°C): +/- 0.5%
Thermowell Material \| Bore Diameter	0.260” (6.60mm)
Din Standard \| Temperature Coeffcient	DIN EN 60751 (IEC 751) \| 3850 ppm/°C
TTM100/TTM1K NIST Certification Points	3 Point NIST: 20%, 50% \& 80% of span 5 Point NIST: 20%, 35%, 50%, 65%, 80% of span
Transmitter Supply Voltage \| Supply Current	+8.5 to 32 VDC (Reverse Polarity Protected) \| 25 mA minimum 250 Ohm Load: +13.5 to 32 VDC \| 500 Ohm Load: +18.5 to 32 VDC
Matched Calibrated Temperature Spans (A/TTM models) Range	-45 to 155°C (-49 to 311°F)
Enclosure Specifications (Material, Flammability, Temperature, NEMA/IP Rating)	“-GD” Enclosure: Galvanized Steel, -40 to 121°C (-40 to 250°F), NEMA 1 (IP10) “-PB” Enclosure: -30 to 100ºC (-22 to 212ºF), ABS Plastic, UL94-5VB, Plenum Rated “-BB” Enclosure: Aluminum, -40 to 121°C (-40 to 250°F), NEMA 3R “-4X” Enclosure: Polystyrene Plastic, -40 to 70°C (-40 to 158°F), UL94-V2, NEMA 4X (IP 66)