Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/BALCO-INW-4"-GD

SKU: CS6286502MPN: A/BALCO-INW-4"-GDAlternate Part #: 123343

1,000 Ohm Balco RTD, Immersion, No Well, 4”, Galvanized Enclosure

ACI A/0.1AN-INW-4"-GD, A/0.1AN-INW-6"-GD, A/0.1AN-INW-6"-GD-NIST, A/0.1CP-INW-12"-GD, A/0.1CP-INW-2.5"-GD, A/0.1CP-INW-2.5"-GD-NIST, A/0.1CP-INW-4"-GD, A/0.1CP-INW-4"-GD-NIST, A/0.1CP-INW-6"-GD, A/0.1CP-INW-6"-GD-NIST, A/0.1CP-INW-8"-GD, A/1.8K-INW-12"-GD, A/1.8K-INW-2.5"-GD, A/1.8K-INW-4"-GD, A/1.8K-INW-6"-GD
Contact us for pricing and availability

Product Details

1,000 Ohm Balco RTD, Immersion, No Well, 4”, Galvanized Enclosure

Product Configuration

NIST None
Length 4”
Enclosure Galvanized
Thermowell Type No Well

Product Family Specifications

Stability +/- 0.05% after 1000 Hours @ 150°C (302°F)
Sensor Type Balco RTD
Number Wires Two (Non-Polarity Sensitive)
Sensor Curve PTC (Positive Temperature Coecient)
Probe Diameter 0.250” (6.35mm)
Probe Material 304 Stainless Steel
Sensor Threads ½” NPS (National Pipe Straight) Male Thread
Sensor Accuracy 70°F (21°C): +/- 1%
Agency Approvals CE, RoHS2, WEEE
Lead Wire Colors (Orange/Yellow)
Conductor Material Silver Plated Copper
Number Sensing Points One
Temperature Coefficient 4618 ppm/°C
Operating Humidity Range 10 to 95% RH, non-condensing
Maximum Operating Current 5 mA
Storage Temperature Range -40 to 85°C (-40 to 185°F)
Operating Temperature Range -40 to 121°C (-40 to 250°F)
Lead Length | Conductor Size 14” (35.6 cm) | 22 AWG (0.65mm)
Response Time (63% Step Change) 8 Seconds nominal
Sensor Output @ 21.1ºC (70ºF) 1000 Ohms nominal
Lead Wire Insulation | Wire Rating Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Thermowell Material | Bore Diameter 304 Series Stainless Steel | 0.260”
Fitting Material | Flammability Rating Polyamide 66 (High Performance Nylon 66) | UL94-HB
Foam Pad Material | Flammability Rating Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C
Thermowell Instrument Thread | Process Thread ½” NPS (National Pipe Straight) Thread | ½” NPT (National Pipe Tapered) Male Thread

Specifications

SKUCS6286502
MPNA/BALCO-INW-4"-GD
Alternate Part #123343

You may also like