Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/CP-D-6"-BB

SKU: CS6286241MPN: A/CP-D-6"-BBAlternate Part #: 121995

10,000 Ohm Thermistor (Type II), Duct, 6”, NEMA 3R Enclosure

ACI A/0.1AN-INW-4"-BB, A/0.1CP-INW-2.5"-BB, A/0.1CP-INW-4 -BB, A/0.1CP-INW-4"-BB-NIST, A/0.1CP-INW-6"-BB, A/1.8K-D-12"-BB, A/1.8K-D-4"-BB, A/1.8K-INW-12"-BB, A/1.8K-INW-2.5"-BB, A/1.8K-INW-4"-BB, A/1.8K-INW-6"-BB, A/1.8K-RA-24"-BB, A/100-2W-D-12"-BB, A/100-2W-D-6"-BB, A/100-2W-INW-2.5"-BB
Contact us for pricing and availability

Product Details

10,000 Ohm Thermistor (Type II), Duct, 6”, NEMA 3R Enclosure

Product Configuration

Length 6”
Sensor CP (10K Ω, Type II)
Enclosure Aluminum, NEMA 3R
Temperature Series Thermistor

Product Family Specifications

Stability Sensor Dependent; Contact ACI for more information on specific sensor
Sensor Type Thermistor
Number Wires Two (Non-Polarity Sensitive)
Sensor Curve Non-Linear, NTC (Negative Temperature Coecient)
Probe Diameter 0.250” (6.35mm)
Probe Material 304 Stainless Steel
Sensor Accuracy +/-0.2ºC (+/-0.36ºF) A/10K-E1 Series: +/-0.3ºC (+/-0.54ºF) A/1.8K Series: +/- 0.5ºC @ 25ºC (77ºF) and (+/-1.0ºC) (+/-1.8ºF)
Agency Approvals CE, UKCA, RoHS2, WEEE
Conductor Material Silver Plated Copper
Number Sensing Points One
Operating Humidity Range 10 to 95% RH, non-condensing
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Power Dissipation Constant 3 mW/ºC A/1.8K Series: 1 mW/ºC A/10K-E1 Series: 2 mW/ºC
Operating Temperature Range -40ºC (-40ºF) to 150ºC (302ºF)
Enclosure Temperature Rating “-GD” Enclosure: -40 to 115ºC (-40 to 239ºF), Galvanized Steel, NEMA 1 (IP10) “-PB” Enclosure: -30 to 100ºC (-22 to 212ºF), ABS Plastic, UL94-5VB, Plenum Rated “-BB” Enclosure: -40 to 115ºC (-40 to 239ºF), Aluminum, NEMA 3R (IP14) “-4X” Enclosure: -40 to 70ºC (-40 to 158ºF), Polystyrene Plastic, NEMA 4X (IP66)
Lead Length | Conductor Size 4”, 6” and 8” Probes: 14” (35.6 cm) | 22 AWG (0.65 mm) 12” and 18” Probes: 24” (61 cm) | 22 AWG (0.65 mm)
Response Time (63% Step Change) 10 Seconds nominal
Lead Wire Insulation | Wire Rating Etched Teflon (PTFE) Colored Leads | Mil Spec 16878/4 Type E)
Fitting Material | Flammability Rating Polyamide 66 (High Performance Nylon) | UL94-HB
Foam Pad Material | Flammability Rating Neoprene/EPDM/SBR Polymer | UL94-HBF; FMVSS-302; MIL-R-6130C

Specifications

SKUCS6286241
MPNA/CP-D-6"-BB
Alternate Part #121995

You may also like