Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsACI

ACI A/100-3W-PO-4"

SKU: CS6285840MPN: A/100-3W-PO-4"Alternate Part #: 120048

100 Ohm (Three Wires) RTD, Probe Only, 4”

ACI A/0.1CP-PO-4", A/1.8K-PO-4", A/1.8K-PO-6", A/100-2W-PO-2", A/100-2W-PO-4", A/100-2W-PO-6", A/100-2W-PO-8", A/100-3W-PO-12", A/100-3W-PO-18", A/100-3W-PO-2", A/100-3W-PO-4", A/100-3W-PO-6", A/100-3W-PO-8", A/100KS-PO-6", A/10K-E1-PO-2"
Contact us for pricing and availability

Product Details

100 Ohm (Three Wires) RTD, Probe Only, 4”

Product Configuration

Wire Standard Leads
Length 4”
Sensor 100-3W (100 Ω, 3 Wires)

Product Family Specifications

Stability +/- 0.03% after 1000 Hours @ 300ºC (572ºF)
Number Wires A/100-2W-PO-XX” Series and A/1K-2W-PO-XX Series: Two (Non-Polarity Sensitive) A/1K-2W-PO-XX” Series and A/1K-3W-PO-XX Series: Three (Polarity Sensitive)
Probe Material 0.250” (6.35mm)
Product Weight 4” \= 0.028 lbs. (12.7g) 6” \= 0.036 lbs. (16.3g) 8” \= 0.044 lbs. (20g) 12” \= 0.066 lbs. (29.9g) 18” \= 0.09 lbs. (40.8g)
Sensor Accuracy +/- 0.06% Class A (Tolerance Formula: +/- ºC \= (0.15ºC + (0.002 * |t|)) where |t| is the absolute value of Temperature above or below 0ºC in ºC) -40ºC (-40ºF): +/- 0.23ºC (+/- 0.414ºF) | 0ºC (32ºF): +/- 0.15ºC (+/- 0.27ºF) | 200ºC (392ºF): +/- 0.55ºC (+/- 0.99ºF)
Agency Approvals CE, RoHS2, WEEE
Rated Application CL2P: Suitable for Indoor and Outdoor (wet) locations. Oil, Gas, Sunlight, Abrasion Acid Resistant
Conductor Material CL2P: Tinned Copper
Operating RH Range 10 to 95% RH, non-condensing
Number Sensing Points One
Storage Temperature Range -40 to 85ºC (-40 to 185ºF)
Sensor Type | Sensor Curve Platinum RTD | PTC (Positive Temperature Coefficient)
Operating Temperature Range -55°C (-67°F) to 200°C (392°F)
Lead Length | Conductor Size 4”, 6” and 8” Probes: 14” (35.6 cm) | 12” and 18” Probes: 24” (61cm) | 22 AWG (0.65mm)
Sensor Output @ 0ºC (32ºF) A/100-xW-PO Series: 100 Ohms nominal | A/1K-xW-PO Series: 1000 Ohms nominal
Response Time (63% Step Change) 8 Seconds nominal
Cable Operating Temperature Range CL2P: -80°C (-112°F) to 150°C (302°F)
Lead Wire Insulation | Wire Rating CL2P: FEP (Fluorinated Ethylene Propylene) | TYPE CL2P - TYPE CMP 22 AWG (UL), C(UL) FEP/FEP E130356 ROHS
Din Standard | Temperature Coeffcient DIN EN 60751 (IEC 751) | 3850 ppm / ºC
Self-Heating | Maximum Operating Current 100 Ohm RTD: 7 mW/ºC (Still Air) | 5 mA | 1K Ohm RTD: 4mW/ºC (Still Air) | 3 mA

Specifications

SKUCS6285840
MPNA/100-3W-PO-4"
Alternate Part #120048

You may also like