Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

menu
(800) 356-8000hello@cappusa.com//Cart
Omega

Omega STAC6-S

SKU: CS5798064MPN: STAC6-S

High Performance Stepper Drives with Integrated Power Supply

Omega STAC6-S, STAC6-S-220V, STAC6-SI, STAC6-SI-220V
$2,085.48
Unit
Available on backorder
remove
add

Documents

Product Details

  • Current Output 0.5 to 6.0 A
  • 90 to 135 Vac Input
  • 220 Vac model available
  • Configurable Idle Current Reduction

Attributes

Series ID STAC6-Srs-Stepper-Drives
Protection Over voltage, under voltage, over-temp, external output shorts (phase-to-phase, phase-to-ground), internal amplifier shorts
Resolution Software selectable from 200 to 51,200 steps/rev in increments of 1 step/rev
Control Mode Step and Direction, Velocity, Streaming Commands
Input Voltage 5 to 12 V
Amplifier Type MOSFET, Dual H-Bridge, 4 Quadrant
Current Rating 0.5 to 6.0 A in 0.01 A increments
Data Interface RS232, RS485
Driver Current 0.5 to 6 A/Phase
Supply Voltage 94 to 35 Vac
driver-current 0.5 to 6 A/Phase
Number of Inputs 7
Country of Origin China
Number of Outputs 3
Relative Humidity 90% non-condensing
Additional Features 2 Standard, STAC6 Configurator
Control Characteristics Non-Volatile Storage: Configurations are stored in FLASH memory Step and Direction Inputs: Optically Isolated: 5 to 12V; minimum pulse width = 200 ns; maximum pulse frequency = 2 MHz Speed Range: Depends upon selected resolution; amplifier is suitable for speeds up to 133 rps Resolution: Software selectable from 200 to 51,200 steps/rev in increments of 1 step/rev Encoder Option: Differential line receivers suitable for 200 KHz or greater
Operating Temperature, Max 55 °C
Operating Temperature, Min 0 °C
Motion Precision & Smoothness Speed Range: Depends upon selected resolution; amplifier is suitable for speeds up to 133 rps
Control Interfaces & Operating Modes Step and Direction Inputs: Optically Isolated: 5 to 12V; minimum pulse width = 200 ns; maximum pulse frequency = 2 MHz; Digital Inputs: 7 Digital Inputs: Two 5V, Five 12 to 24 V; Digital Output: 3 Digital Outputs: 30V; Analog Inputs: 2 Analog Inputs: ±10V; Motor Regeneration: Built-in regeneration circuit (25 W max);Current Control: 4 state PWM at 20 KHz

Specifications

SKUCS5798064
MPNSTAC6-S

You may also like