Veris U001-0158

Tee Meter, Brass Flow Sensor: 2” Cast Brass Tee

Tee Meter, Brass Flow Sensor:

• 2” Cast Brass Tee

Metal tee-style liquid flow sensor with cast bronze housing fits ½” to 1.5” NPT. These sensors are accurate, even at low flow rates. Use in conjunction with a Veris flow monitor or transmitter for a complete flow monitoring system.

APPLICATIONS

• Measuring liquid flow rates
• Accounting for total accumulated flow

Features

• PPS electronics housing…highly durable
• Six-bladed impeller design with a proprietary, non-magnetic sensing mechanism…high accuracy and repeatability
• Forward-swept impeller is less prone to fouling by water-borne debris…reliable performance with minimal downtime
• Operation and repeatability even at low flow rates
• Signal can travel up to 2000 ft (609m) between the sensor and the display unit without the need for amplification
• Supplied with 20 ft (6m) of 2-conductor AWG 20 UL type PTLC cable (105ºC rated)
• Sensors of similar type are interchangeable, so there is no need for recalibration after servicing or replacement…quick install and fast maintenance

Series Specifications

• Maximum Pressure At 38ºC (100ºF) 400psi; At 105ºC (221ºF) 325psi
• Wetted Materials UHMW-PE bearing, polyamide impeller, tungsten carbide shaft, EPDM O-rings
• Recommended Flow 0.3 to 15 ft/sec (0.09 to 4.5m/sec)
• Accuracy +/-1.0% of rate
• Repeatability +/-0.7% over recommended design flow range*
• Linearity +/-0.7% over recommended design flow range*
• Rangeability 60:1
• Transducer Excitation Quiescent current 600uA@8VDC to 35VDC max.; Quiescent voltage (Vh)\=Vsupply - (600mA*Zsupply); On-State (Vlow) Max 1.2VDC@40mA current limit(15 ?+0.7VDC
• Output Frequency 0.8 to 80 Hz

* \=10 upstream and \=5 downstream straight pipe diameters, uninterrupted flow.