Johnson Controls | Siemens | Belimo | York | Schneider Electric | Trane | Sick | ASCO | DwyerOmega | Bell & Gossett | Honeywell | IMO Automation | Pepperl+Fuchs | Fireye | Eaton | Carrier | Square D and many more!

// 500+ Brands

// Authorized Distributor of Over 100 Brands

(800) 356-8000hello@cappusa.com//Cart
All ProductsDwyer

Dwyer IEF-SB-PG-LCD

SKU: CS4118725MPN: IEF-SB-PG-LCDAlternate Part #: 100770-26

IEF-SB-PG-LCD IEF STD ACC,BSPT

$3,254.34
Unit
Available on backorder
remove
add

Product Details

Insertion Electromagnetic flow transmitter, standard accuracy 4-36” (100-900 mm) pipe, 1% FS, 1” male BSPT, pg gland without cable with LCD display

Attributes

Accuracy High accuracy units: ±0.5% of reading at calibrated velocity; ±1% of reading from 2 to 20 ft/s (0.6 to 6 m/s); ±0.02 ft/s (±0.006 m/s) at
Applicable Pipe Material Most popular plastic and metal pipes; i.e. Carbon steel, SS, copper, UPVC/PVDF, galvanized steel, mild steel, and brass_x0080_ .
Applicable Pipe Size 4 to 36” (101 to 914 mm), model dependent. See model chart on catalog page.
Commodity Code 8216
Compliance BTL, CE, NSF/ANSI 61 and 372.
Conductivity >20 microsiemens.
Device Load ⅛ unit load.
Display 2” ( 5.08 cm) x 2” (5.08 cm) graphic LCD with backlight.
Electrical Connection Removable terminal blocks, model selectable ½” female NPT conduit connection, PG 16 gland or PG 16 gland with (2) 10 ft (3 m) 9 conductor 22 AWG plenum rated cables, accessory cable lengths up to 200 ft (61 m) optional.
Enclosure Material Powder coated die cast aluminum.
Enclosure Rating NEMA 6P (IP68) (Non display models); NEMA 4X (IP66) (-LCD option).
Glycol 0 to 100% display selectable.
Output (1) Analog: 4-20 mA, 0-5 V, 0-10 V or 2-10 V (display selectable); (1) Pulse/Frequency: 0-15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable); (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable); (1) Reverse flow output indication.
Power Requirement 12 to 42.4 VDC, .25 A @ 24 VDC; 12 to 36 VAC.
Pressure Drop < 0.1 psi at 12 ft/s in 4” (101.6 mm) and larger pipe.
Pressure Limit 400 psi (27.6 bar) @ 100º F (37.8°C).
Process Connection 1” NPT or BSPT with accessory full port ball valve options.
Range 0 to 20 ft/s (0 to 6 m/s).*
Service Compatible clean or dirty non coating, conductive liquids.
Supported Baud Rate 9600, 19200, 38400, 57600, 76800, or 115200 bps (display selectable).
Type BACnet MS/TP or Modbus® RTU communication protocol (default disabled, display selectable).
Wetted Material Body shaft/fitting: 316SS; Electrodes: 316SS; Electrode cap: Polymer/Polystyrene; O-ring: Silicon.

Specifications

SKUCS4118725
MPNIEF-SB-PG-LCD
Alternate Part #100770-26

You may also like